GPC DJI M30 12 Battery Case

The GPC DJI M30 12 Battery Case is a wheeled, watertight, MIL-spec carrying case built to hold twelve TB30 flight batteries, four WB37 controller batteries, one DJI RC Plus remote controller, and a miscellaneous accessory cavity for the DJI Matrice 30 Series. Designed as the natural companion to the GPC M30 Series aircraft case, this battery-only case extends an M30 / M30T program from a half-day kit to a full-day operation — six full battery rotations on the aircraft, plus four extended controller batteries, all in one watertight SKB shell. Made in the USA, padlock-ready, and backed by a lifetime replacement guarantee.

USA-made wheeled battery case for the DJI Matrice 30 Series. Twelve TB30 flight batteries, four WB37 controller batteries, one DJI RC Plus, and accessory cavity in a single MIL-spec shell.

Features

• Twelve dedicated foam cavities for the DJI TB30 Intelligent Flight Batteries — six full rotations on a Matrice 30 / M30T, enough power for a sustained mission day without returning to a charging station
• Four additional cavities for DJI WB37 controller batteries, the external battery used by the DJI RC Plus controller for extended runtime
• Dedicated cavity for the DJI RC Plus remote controller, so the case can travel as a complete battery-and-controller kit alongside the aircraft case
• Miscellaneous accessory cavity for cables, chargers, USB plugs, and small items the operator picks up over time
• SKB military-spec hard-shell case, made in the USA, with water-jet precision-cut closed-cell foam tooled for the TB30, WB37, and RC Plus dimensions
• Inline skate-style wheels and pull handle — sized for a 13-pound empty case that loads to 40+ pounds with a full battery complement
• Padlock-ready: padlock holes are reinforced with stainless steel padlock protector clips, so the case can be secured against tampering in vehicles, hotels, and shared facilities
• Watertight and dust tight construction (MIL-C-4150J), resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F), and rated for impact protection (MIL-STD-810F)
• Ambient pressure equalization valve (MIL-STD-648C) automatically equalizes air pressure during elevation changes
• Molded-in hinge and trigger-release latches engineered for daily open-close cycles
• Lifetime replacement guarantee from Go Professional Cases on the case shell and hardware

What it carries

• 12 × DJI TB30 Intelligent Flight Batteries (six flight rotations for the M30 / M30T)
• 4 × DJI WB37 controller batteries (external batteries for the DJI RC Plus)
• 1 × DJI RC Plus Remote Controller
• 1 × Miscellaneous accessory cavity for cables, chargers, USB plugs, and small accessories

Specifications

Who this is for

• Matrice 30 / M30T operators running full-day public-safety, fire-service, or DFR operations where twelve TB30 batteries cover six aircraft rotations without returning to a base charger
• Fleet operators standardizing battery transport across multiple M30 / M30T airframes, where keeping batteries in dedicated padded cavities matters for cycle life and warranty
• Public-safety, emergency-management, and search-and-rescue programs that need sustained airborne presence and can rotate batteries through the case as ground crews charge the depleted packs
• Inspection, utility, and survey crews running long sites where reducing trips back to the staging area means more time on target
• Training programs running multiple pilots through an M30 / M30T platform in a single day, where the battery case carries the controller and all the flight power in one rolling unit
• Operators pairing this case with the GPC M30 Series aircraft case for a complete two-case kit: one aircraft case, one battery case, full mission ready

What's included

• 1 × GPC DJI M30 12 Battery Wheeled Case (hard shell + custom TB30 / WB37 / RC Plus foam insert)

Please note: Batteries are sold separately. The case holds twelve TB30 packs, four WB37 packs, and one RC Plus controller — none of these are included with the case. Padlocks for the case's lockable holes are also sold separately.

Pairing with the GPC M30 Series aircraft case

This battery case is designed as a companion to the GPC DJI Matrice 30 Series aircraft case (sold separately). Together, the two cases form a complete fleet transport solution:

• Aircraft case (sold separately): M30 / M30T airframe, two RC Plus controllers, six TB30 batteries, two WB37 batteries, spare props, screwdriver, and customizable payload accessory cavity (e.g., CZI LP12)
• This battery case: Twelve additional TB30 batteries, four additional WB37 batteries, one additional RC Plus controller, and accessory cavity

Together, the two-case kit gives you the M30 / M30T, two RC Plus controllers (plus a third in the battery case), six WB37 packs total, eighteen TB30 flight batteries (nine full rotations), and full accessory support. That's enough to run a multi-pilot M30 program across a multi-day operation without compromise.

Air travel and lithium-battery shipping

The case ships with the same MIL-spec construction as other GPC products. Lithium-battery air travel rules apply to the batteries themselves:

• TB30 (M30 / M30T flight battery) is 131.6 Wh per pack — above the FAA / IATA 100 Wh standard carry-on threshold but below the 160 Wh limit that allows airline-approved passenger carry-on with prior authorization. Each airline handles 100-160 Wh batteries differently; obtain written approval before traveling.
• WB37 (RC Plus controller battery) is 37.39 Wh per pack and travels under standard rules (sub-100 Wh batteries are normal carry-on items, up to ~20 spares per passenger).
• Spare lithium batteries of any capacity are not permitted in checked baggage. If you check the case, remove all batteries first.

For programs traveling by air with twelve TB30 batteries, plan ahead: contact your airline for approval, and recognize that twelve packs may exceed individual passenger limits — multi-passenger or freight shipment may be required.

FAQ