GPC
GPC D-RTK 2 Ground Station Bag
The GPC D-RTK 2 Ground Station Bag is a soft-shell carrying bag built specifically to hold the DJI D-RTK 2 High-Precision GNSS Mobile Station and its accessories. Constructed from rugged 800-denier fabric with a customized closed-cell foam insert and a 2-inch lid liner that stiffens the bag for stacking, this is the right transport solution for operators who need protection for the ground station unit without the weight and bulk of a full hard case. Made in the USA by Go Professional Cases. Designed to travel as the companion piece to the GPC D-RTK 2 Tripod Bag (sold separately) for a complete two-bag base-station kit.
USA-made soft carrying bag for the DJI D-RTK 2 High-Precision GNSS Mobile Station. 800-denier fabric, custom foam insert, 2-inch lid liner. The lighter alternative to a hard case for the base-station unit.
Features
- Custom-tooled closed-cell foam insert designed specifically for the DJI D-RTK 2 Mobile Station body and its accessories
- 2-inch thick foam lining the lid for impact protection and rigidity — the lid stays firm enough to stack other gear on top of the bag
- 800-denier fabric exterior, the same fabric weight used on field-rated tool and equipment bags, with abrasion resistance for vehicle and ground transport
- Full-perimeter zipper closure for easy access to the ground station and accessories during setup and teardown
- Custom GPC tooling sized for the actual D-RTK 2 unit dimensions rather than a generic interior layout
- Designed for compatibility with the GPC D-RTK 2 Tripod Bag (sold separately) — together, the two bags carry the entire base-station kit in two lightweight transport units instead of one oversized hard case
- Significantly lighter than a hard case for the same protection level, making it the practical choice for crews who set up the base station daily across multiple sites
- Made in the USA by Go Professional Cases, the same manufacturer that supplies hard cases and bags for DJI's enterprise drone lineup
What it carries
- 1 × DJI D-RTK 2 High-Precision GNSS Mobile Station body
- D-RTK 2 accessories (batteries, cables, mounting hardware as packed in the original DJI kit)
Specifications
| Specification | Value |
|---|---|
| Manufacturer | Go Professional Cases (GPC), Inc. |
| Country of origin | Made in the USA (Poway, California) |
| Compatible equipment | DJI D-RTK 2 High-Precision GNSS Mobile Station |
| Construction | Soft-shell carrying bag |
| Exterior fabric | 800-denier |
| Interior foam | Closed-cell, water-jet precision-cut for the D-RTK 2 unit |
| Lid liner | 2-inch closed-cell foam |
| Closure | Zipper |
| Companion product | GPC D-RTK 2 Tripod Bag (sold separately) for the tripod and ground station pole |
Who this is for
- Operators running the DJI D-RTK 2 Mobile Station as the RTK base for Matrice 300 RTK, Matrice 350 RTK, Phantom 4 RTK, or Matrice 210 RTK V2 missions, where the base station moves with the crew daily
- Surveying, mapping, and inspection contractors who set up the D-RTK 2 in different locations each shift and need a practical transport solution between the truck and the deployment point
- Crews already running the GPC D-RTK 2 Tripod Bag who want a matched companion bag for the ground station unit — the two-bag kit handles the complete D-RTK 2 setup
- Public-safety and emergency-response programs running D-RTK 2 for high-accuracy mapping work in the field, where a lightweight soft bag beats wrestling a hard case in and out of vehicles
- Operators who want USA-made gear backed by a reputable manufacturer rather than a generic third-party bag
What's included
- 1 × GPC D-RTK 2 Ground Station Bag (soft-shell carrying bag with custom foam insert)
Please note: The DJI D-RTK 2 Mobile Station itself, batteries, tripod, ground station pole, and any other accessories are sold separately. This bag is the transport solution for the ground station unit only. The tripod and pole are carried in the separately sold GPC D-RTK 2 Tripod Bag.
Pairing with the GPC D-RTK 2 Tripod Bag
The complete D-RTK 2 transport kit is two bags:
- This bag (Ground Station Bag): Holds the D-RTK 2 mobile station unit and its accessories.
- GPC D-RTK 2 Tripod Bag (sold separately): Holds the D-RTK 2 tripod and ground station pole in a long carrier sized for the assembled tripod kit.
Together, the two bags travel as a complete base-station kit — lighter, more compact, and faster to set up than a single oversized hard case. Most operators carry both bags together; some crews leave the tripod set up on a vehicle mount and use just this Ground Station Bag for the base unit.
FAQ
Which DJI products use the D-RTK 2?
The DJI D-RTK 2 High-Precision GNSS Mobile Station provides RTK corrections to several DJI aircraft, including the Matrice 300 RTK, Matrice 350 RTK, Phantom 4 RTK, Matrice 210 RTK V2, and DJI Agras agricultural drones. This bag is sized for the D-RTK 2 unit regardless of which aircraft it pairs with. If you're using the newer DJI D-RTK 3 Multifunctional Station, this is not the correct bag — the D-RTK 3 is a different unit with different dimensions.
Is this a hard case or a soft bag?
Soft bag. The exterior is 800-denier fabric (rugged but flexible), and the interior is custom foam tooled for the D-RTK 2. The 2-inch foam in the lid adds rigidity so the bag stacks well in a vehicle. For maximum protection against impact and water in extreme conditions, a hard case is the stronger choice; the soft bag is the right balance for daily field use where weight and bulk matter.
Does it include the D-RTK 2 base station?
No. The bag holds the D-RTK 2 base station — the station itself is sold separately by DJI. This bag is the transport solution for operators who already own (or are buying) the D-RTK 2 and need a practical way to move it between sites.
Will it fit the tripod?
No. This bag is sized for the D-RTK 2 ground station unit only. The tripod and ground station pole are carried in the separately sold GPC D-RTK 2 Tripod Bag (approximately 48 × 7 × 7 in, designed for the long tripod / pole assembly). Most operators carry both bags together for a complete D-RTK 2 transport kit.
Can I check this on an airline?
The D-RTK 2 contains an intelligent battery rated around 15.4 Wh — well under the FAA / IATA 100 Wh threshold for spare lithium batteries in carry-on, so the unit can travel commercial without battery restrictions. The bag itself is small enough to qualify as carry-on or checked baggage on most airlines depending on size limits. Verify with your specific airline before traveling, particularly if you're traveling with the unit installed in the bag.
How is this different from the GPC D-RTK 2 Tripod Bag?
Two different products for two different parts of the kit. The Tripod Bag is a long bag (about 48 inches) sized for the tripod and ground station pole. This Ground Station Bag is sized for the base-station unit itself. Together they form the complete D-RTK 2 transport kit — most operators buy both. Sold separately to keep the cost flexible for customers who only need one piece.
Where is it made?
Designed and built in Poway, California by Go Professional Cases — the same manufacturer that supplies hard cases and bags for DJI's enterprise drone lineup used by public-safety, surveying, federal, and commercial operators.
What's the warranty?
The bag ships with GPC's standard warranty against manufacturing defects in fabric, foam, zipper, and stitching. The foam insert is consumable; replacement foam is available if needed. Standard exclusions apply for damage from extreme misuse or unauthorized modification. Contact us for service or warranty questions.
