DJI
DJI Mavic 3 Enterprise Battery Kit
The DJI Mavic 3 Enterprise Series Battery Kit is the three-battery starter bundle for the DJI Mavic 3 Enterprise (M3E) and Mavic 3 Thermal (M3T). It pairs three Mavic 3 Enterprise Series Intelligent Flight Batteries (BWX260, 5000 mAh, 77 Wh) with the 100 W Mavic 3 Battery Charging Hub (CHX265-100) and a USB-C cable, giving an operator a full three-battery rotation in a single SKU. Each pack flies the M3E or M3T for up to 45 minutes, and the hub charges packs in sequence in approximately 70 minutes each.
Three-battery rotation for the DJI Mavic 3 Enterprise and Thermal, with the 100 W charging hub and USB-C cable. ~45 minutes of flight per pack, all packs travel-friendly at 77 Wh.
Features
- Three DJI Mavic 3 Enterprise Series Intelligent Flight Batteries (BWX260-5000-15.4), the factory pack for the M3E and M3T airframes
- 5000 mAh, 15.4 V, 77 Wh Li-ion chemistry per battery: up to 45 minutes of flight time per pack on the M3E or M3T (DJI lab data, no wind, no payload)
- DJI Mavic 3 Battery Charging Hub (CHX265-100) rated at 100 W, charging packs in sequence from highest state of charge to lowest in approximately 70 minutes per battery
- USB-C input on the hub, so a single AC adapter or USB-C PD source drives the entire kit
- Hub measures 150 × 55 × 28 mm and weighs approximately 116 g, fitting easily into a field case alongside the M3E or M3T flight kit
- At 77 Wh per battery, all three packs sit under the FAA / IATA 100 Wh threshold for spare lithium batteries in passenger carry-on, with no special airline approval required
Specifications
Intelligent Flight Battery
| Specification | Value |
|---|---|
| Model | BWX260-5000-15.4 |
| Capacity | 5000 mAh |
| Voltage (nominal) | 15.4 V |
| Energy | 77 Wh |
| Chemistry | Li-ion |
| Flight time | Up to approximately 45 minutes per pack on the M3E or M3T |
| Compatible aircraft | DJI Mavic 3 Enterprise (M3E), DJI Mavic 3 Thermal (M3T) |
Battery Charging Hub
| Specification | Value |
|---|---|
| Model | CHX265-100 |
| Rated power | 100 W |
| Bays | 3 |
| Charging behavior | Sequential, highest charge level to lowest |
| Charging time per battery | Approximately 70 minutes |
| Dimensions | 150 × 55 × 28 mm |
| Weight | Approximately 116 g |
| Compatible battery | BWX260-5000-15.4 only |
Who this is for
- Mavic 3 Enterprise or Mavic 3 Thermal pilots standing up a new aircraft and needing a full three-battery rotation plus charging infrastructure in one SKU rather than buying components à la carte
- Public-safety, inspection, mapping, and survey crews who need consecutive flights through a working day, with packs cycling between aircraft, hub, and shelf
- Fleet operators standardizing on the M3E or M3T platform across multiple airframes, where common spares and charging infrastructure reduces the support burden
- Operators who travel to job sites by commercial air and want a flight-battery setup that fits under standard airline carry-on rules
What's included
- 3 × DJI Mavic 3 Enterprise Series Intelligent Flight Battery (BWX260-5000-15.4)
- 1 × DJI Mavic 3 Battery Charging Hub (CHX265-100, 100 W)
- 1 × USB-C cable
Please note: This kit is built for the DJI Mavic 3 Enterprise (M3E) and Mavic 3 Thermal (M3T). The batteries and hub in this kit are not the same as the consumer DJI Mavic 3 / Mavic 3 Cine batteries, which run different firmware even though the physical model number is similar. Verify your aircraft variant before ordering.
This kit does not include an aircraft, an AC power adapter, or any other accessories beyond what's listed above. A USB-C Power Delivery source is required to drive the hub; the included USB-C cable connects to a charger of your choice.
Travel and shipping: At 77 Wh per pack, the Mavic 3 Enterprise Series battery sits under the FAA / IATA 100 Wh threshold for spare lithium batteries in passenger carry-on. Airlines treat sub-100 Wh packs as standard carry-on items, typically allowing up to 20 spares per passenger without special approval. Spare lithium batteries are not permitted in checked baggage. Carry packs with terminals protected against short-circuit, and confirm your airline's specific lithium battery policy before traveling.
FAQ
Which aircraft does this kit fit?
The DJI Mavic 3 Enterprise (M3E) and DJI Mavic 3 Thermal (M3T). These are the two non-multispectral Mavic 3 Enterprise airframes. The kit is not intended for the consumer DJI Mavic 3 or Mavic 3 Cine, which use a similarly numbered battery with different firmware.
How long does each battery fly?
Up to approximately 45 minutes per pack on the Mavic 3 Enterprise or Mavic 3 Thermal, per DJI's published lab data with no payload in a windless environment. Real-world flight time is shorter and varies with wind, temperature, payload, and flight profile.
How long does it take to charge a battery?
Approximately 70 minutes per battery on the 100 W charging hub included in this kit. The hub charges packs in sequence from the highest state of charge to the lowest, not in parallel, so a fully drained set of three takes roughly 3 hours and 30 minutes to bring back to 100%.
What charger do I plug into the hub?
The hub accepts a USB-C input. The included USB-C cable connects to a charger that you supply. The DJI 65 W or 100 W chargers work well, as does any FCC-certified USB-C Power Delivery charger of similar rating. The hub itself is rated for 100 W input.
Are these batteries the same as the consumer Mavic 3 batteries?
Physically very similar, but not interchangeable. The Enterprise series batteries (M3E / M3T) and the consumer Mavic 3 / Mavic 3 Cine batteries share the BWX260 family designation, but they ship with different firmware and are matched to different aircraft. Use the Enterprise kit on M3E and M3T airframes; use the consumer batteries on the consumer Mavic 3 family.
Can I take the batteries on a commercial flight?
Yes. At 77 Wh each, the Mavic 3 Enterprise Series batteries are under the FAA / IATA 100 Wh threshold for spare lithium batteries in passenger carry-on. Airlines generally allow up to 20 sub-100 Wh spare batteries per passenger in carry-on without special approval. Spare lithium batteries are not permitted in checked baggage. Carry packs with terminals protected against short-circuit (in original packaging or with tape over the contacts) and confirm your specific airline's policy before traveling.
What's the cycle life on these batteries?
Lithium-ion service life depends on storage state, temperature, and discharge depth. Rotate packs through partial-charge storage (40 to 65%) between deployments, avoid extended storage at full charge, and let packs reach the recommended charging temperature before connecting them to the hub. The Intelligent Battery firmware self-discharges a stored pack toward a safe storage level over time; refer to the M3E / M3T user manual for the recommended interval.
How should I store the batteries between flights?
For short periods between flights, store at room temperature out of direct sunlight. For longer storage (more than 10 days), discharge each pack to approximately 40 to 65% before storing. The Intelligent Battery firmware will self-discharge a stored pack toward a safe storage level over time. Avoid storing at full charge or fully discharged for extended periods.
