DJI
DJI FPV Remote Controller 3
The DJI FPV Remote Controller 3 is DJI's current-generation gamepad-style controller for FPV operations, built around the O4 video transmission system and designed to pair with the Avata 2, Neo and Neo 2, and the DJI O3 / O4 Air Units used in custom builds. It uses an integrated antenna array that lowers the weight to about 240 g, ships with control sticks that are 2 mm longer than the previous generation for finer finger-on-stick precision, and adds a true Manual mode for advanced FPV pilots flying acro, freestyle, or race profiles.
Gamepad-style FPV controller with O4 transmission, Normal / Sport / Manual modes, and ~10-hour operating time. For Avata 2, Neo, Neo 2, and O3 / O4 Air Unit builds.
Features
- Engineered for DJI O4 video transmission with an integrated antenna design, paired with DJI Goggles to deliver low-latency FPV control on supported aircraft
- Three flight modes: Normal (camera-stable, beginner-friendly), Sport (faster response with limits relaxed), and Manual (full FPV acro / freestyle for advanced pilots)
- Lighter than the previous-generation controller thanks to the integrated antenna array, with approximately 10 hours of operating time on a single charge
- Control sticks are 2 mm longer than the prior generation, supporting both single-finger and dual-finger control grips for finer stick precision
- Stick feel is adjustable using the included L-shaped screwdriver, so pilots can tune the centering tension and throw to their preference
- Compatible with mainstream FPV simulators including Liftoff, Uncrashed, DCL, and The Drone Racing League, so the same controller you fly with can be used for stick-time practice
Specifications
| Specification | Value |
|---|---|
| Video transmission system | DJI O4 |
| Flight modes | Normal, Sport, Manual |
| Antenna | Integrated antenna array |
| Weight | Approximately 240 g |
| Dimensions | 165 × 119 × 62 mm (L × W × H) |
| Operating time | Approximately 10 hours |
| Charging time | Approximately 2 hours |
| Compatible aircraft | DJI Avata 2, DJI Neo, DJI Neo 2 |
| Compatible air units | DJI O3 Air Unit, DJI O4 Air Unit, DJI O4 Air Unit Pro |
| Simulator compatibility | Liftoff, Uncrashed, DCL, The Drone Racing League |
Flight modes
The FPV Remote Controller 3 supports three flight modes, selectable on the aircraft via DJI Fly or the Goggles. The controller hardware is the same across all three modes; the aircraft's flight controller behavior changes.
- Normal mode. Camera-stable, GPS-assisted flight with full obstacle awareness on aircraft that support it. Smooth, beginner-friendly response curves. The mode most pilots start in and the safest choice for camera work.
- Sport mode. Faster response, higher speed ceilings, and more aggressive flight characteristics, while still keeping the aircraft self-leveling between inputs. Good for cinematic moves and faster line work where you still want some flight-controller assistance.
- Manual mode. Full FPV acro / rate mode: the flight controller stops self-leveling, and the aircraft rolls and flips at whatever rate the pilot commands. This is the mode advanced FPV pilots use for freestyle, racing, and aggressive cinematic flying. Build up stick time in a simulator before flying Manual mode on real hardware.
Who this is for
- DJI Avata 2 pilots who want the gamepad-style controller experience instead of the motion controller, or who need Manual mode for acro / freestyle flight
- DJI Neo and Neo 2 pilots ready to graduate from app-based control to a dedicated FPV stick controller
- FPV operators running DJI O3 or O4 Air Units in custom-built FPV airframes, who need a DJI-grade controller to pair with the air unit
- Pilots using FPV simulators (Liftoff, Uncrashed, DCL, The Drone Racing League) to build stick time and want to train on the same controller they fly
- FPV pilots upgrading from the original DJI FPV Remote Controller or Remote Controller 2 to the current O4-compatible generation
What's included
- 1 × DJI FPV Remote Controller 3
- 1 × Pair of control sticks
- 1 × L-shaped screwdriver
Setup and care
- Charge the controller fully before first use. With about 10 hours of operating time on a charge, most pilots only need to top off between sessions.
- Linking is done through DJI Fly or the aircraft's setup procedure on first pairing. Refer to the DJI FPV Remote Controller 3 user manual for the specific aircraft you're flying.
- Manual mode is a real skill. Practice in a simulator (Liftoff, Uncrashed, DCL, or DRL) before flying Manual on real hardware, especially outdoors near people or property. The flight controller will not save a botched input in Manual mode the way it does in Normal or Sport.
- For a customized stick feel, use the included L-shaped screwdriver to adjust the stick tension and travel. The full procedure is in the user manual and DJI's tutorial videos.
- Store the controller in a padded case or sleeve with the sticks protected. The sticks are the most commonly damaged part of any FPV controller during transport.
Please note: The DJI FPV Remote Controller 3 is engineered for DJI's current-generation FPV ecosystem (O4 transmission). It is not compatible with the original DJI Avata (first-generation, 2022), the DJI FPV drone (2021), or pre-O3 aircraft and air units. If you're flying older hardware, you'll need the DJI FPV Remote Controller 2 or the original DJI FPV Remote Controller instead. Verify your aircraft or air unit before ordering.
Under FAA Part 107, operations using first-person view require either a Visual Observer who maintains visual line of sight on the aircraft, or an FAA waiver from 14 CFR 107.31. The controller is hardware and does not change those rules. Recreational pilots flying under Section 44809 should follow the FAA's recreational rules for FPV operations. Plan your operation accordingly.
FAQ
Which aircraft and air units does this controller work with?
DJI lists the FPV Remote Controller 3 as compatible with the DJI Avata 2, DJI Neo, and DJI Neo 2 (aircraft), and the DJI O3 Air Unit, DJI O4 Air Unit, and DJI O4 Air Unit Pro (air units for custom builds). It is not compatible with the original DJI Avata, the original DJI FPV drone, the DJI Mini / Air / Mavic / Matrice families, or any pre-O3 hardware.
What is the difference between Normal, Sport, and Manual modes?
Normal mode is camera-stable and GPS-assisted, with smooth response curves: the easiest mode to fly. Sport mode is faster and more responsive but still self-levels the aircraft when you release the sticks. Manual mode is full FPV acro / rate mode: the flight controller does not self-level, and the aircraft rolls and flips at the rate you command on the sticks. Manual mode is what FPV racing and freestyle pilots fly; it requires meaningful simulator practice before flying live, especially outdoors.
Do I need DJI Goggles to use this controller?
Yes, for FPV operation. The FPV Remote Controller 3 sends commands to the aircraft, but the FPV video feed is delivered through DJI's Goggles (Goggles 2, Goggles Integra, Goggles 3, or other O3/O4-compatible goggles supported by your aircraft). Confirm the goggles your aircraft supports in the aircraft's compatibility chart.
Can I use this controller with FPV simulators?
Yes. DJI lists the FPV Remote Controller 3 as compatible with Liftoff, Uncrashed, DCL — The Game, and The Drone Racing League Simulator. Connecting the controller to a PC or Mac for simulator use lets you build stick time on the same controller you fly with, which is the recommended path for learning Manual mode.
How long does the controller run on a charge?
Approximately 10 hours of operating time per charge, with about a 2-hour recharge cycle. For most pilots that's enough for several flying sessions between charges.
What's different about the FPV Remote Controller 3 vs. the FPV Remote Controller 2?
Three main differences: the Remote Controller 3 is built around the newer O4 transmission system (used by the Avata 2, Neo, Neo 2, and current air units); it uses an integrated antenna array, which reduces weight to about 240 g; and its control sticks are 2 mm longer for finer stick precision. The Remote Controller 2 was built for O3-era hardware and remains the correct controller for the original DJI Avata and the original DJI FPV drone. Aircraft compatibility is not interchangeable between the two controllers.
Can I adjust the stick feel?
Yes. The package includes an L-shaped screwdriver specifically for adjusting the control sticks. The user manual and DJI's tutorial videos walk through changing the centering tension and the throw length, so you can tune the controller to a single-finger pinch grip, a thumbs-on-top grip, or anywhere in between.
Do I need an FAA waiver to fly FPV with this controller?
Under FAA Part 107, FPV operations require either a Visual Observer who maintains visual line of sight on the aircraft, or a waiver from 14 CFR 107.31. The controller and goggles are hardware and don't change the rules. Recreational pilots flying under Section 44809 should follow the FAA's recreational rules for FPV. Confirm the specific requirements for your operation before flying.
Does the controller include the goggles or batteries for the aircraft?
No. The package includes only the controller, a pair of control sticks, and the L-shaped screwdriver. DJI Goggles, aircraft batteries, the aircraft itself, and any chargers are sold separately.
