{"product_id":"dji-matrice-4d-low-noise-anti-icing-propeller-pair","title":"DJI Matrice 4D Low-Noise Anti-Icing Propeller Pair","description":"\u003cp\u003eThe DJI Matrice 4D Low-Noise Anti-Ice Propellers (model 1364F) are genuine DJI folding propellers engineered specifically for the dock-based Matrice 4D and Matrice 4TD aircraft. Each 12.9 in blade is dynamically balanced to lower the aircraft's acoustic footprint and carries an integrated anti-ice coating that helps prevent ice buildup on the blade surface for more stable flight in freezing rain. This listing is a single pair, one clockwise (CW) and one counter-clockwise (CCW) blade.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eGenuine DJI low-noise, anti-ice folding propellers for the Matrice 4D and 4TD. One CW, one CCW per pair.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eGenuine DJI propellers (model 1364F), purpose-built for the Matrice 4D and Matrice 4TD dock-based aircraft\u003c\/li\u003e\n  \u003cli\u003eIntegrated anti-ice coating helps prevent ice buildup on the blade surface, supporting more stable flight in freezing rain and cold-weather operations\u003c\/li\u003e\n  \u003cli\u003eLow-noise blade geometry and dynamic balance testing reduce the aircraft's acoustic footprint and lower vibration\u003c\/li\u003e\n  \u003cli\u003e12.9 in (32.8 cm) diameter with a 6.4 in (16.3 cm) pitch, tuned for the M4D platform's lift and efficiency\u003c\/li\u003e\n  \u003cli\u003eFoldable design and lightweight construction at 13.2 g per pair (two blades)\u003c\/li\u003e\n  \u003cli\u003eEach pair contains one clockwise (CW) and one counter-clockwise (CCW) blade, the configuration needed to replace a matched rotor pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible aircraft\u003c\/td\u003e\n\u003ctd\u003eDJI Matrice 4D, Matrice 4TD\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePropeller model\u003c\/td\u003e\n\u003ctd\u003e1364F (Low-Noise, Anti-Ice)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eFoldable, dynamically balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e12.9 in (32.8 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePitch\u003c\/td\u003e\n\u003ctd\u003e6.4 in (16.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (two blades)\u003c\/td\u003e\n\u003ctd\u003e13.2 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRotation pair\u003c\/td\u003e\n\u003ctd\u003e1 × clockwise (CW), 1 × counter-clockwise (CCW)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecommended replacement\u003c\/td\u003e\n\u003ctd\u003eAfter 450 flights, to maintain anti-ice performance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eCP.EN.00000624.01\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e6937224106420\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatrice 4D and 4TD dock operators running automated, all-weather missions that need to keep flying when temperatures drop and freezing rain is a risk\u003c\/li\u003e\n  \u003cli\u003ePublic-safety, inspection, and monitoring programs deploying docked aircraft in cold climates or through winter\u003c\/li\u003e\n  \u003cli\u003eFleet managers who want factory-spec spare propellers on hand to keep docked aircraft available and on their replacement schedule\u003c\/li\u003e\n  \u003cli\u003eOperators flying over noise-sensitive areas who also need the anti-ice protection this propeller provides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Clockwise (CW) 1364F Low-Noise Anti-Ice propeller\u003c\/li\u003e\n  \u003cli\u003e1 × Counter-clockwise (CCW) 1364F Low-Noise Anti-Ice propeller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation and care\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect propellers before every flight. Replace any blade that is chipped, cracked, warped, or shows visible damage. A damaged propeller is one of the most common preventable causes of in-flight failure on a multirotor.\u003c\/li\u003e\n  \u003cli\u003eDo not clean the blades with oil- or alcohol-based solvents. These can damage the anti-ice coating. Wipe with a soft, dry cloth.\u003c\/li\u003e\n  \u003cli\u003eDJI recommends replacing these propellers after 450 flights to maintain anti-ice performance. Track flight count against this interval as part of your maintenance program.\u003c\/li\u003e\n  \u003cli\u003eReplace the washers and screws when you replace the propellers, and install per the procedure in the DJI Matrice 4D Series user manual. Verify all mounting hardware is fully seated before flight.\u003c\/li\u003e\n  \u003cli\u003eInstall a matched set of the same model on every rotor position. Do not mix different propeller models on the same aircraft; mismatched pitch and profile produce asymmetric thrust and unpredictable handling.\u003c\/li\u003e\n  \u003cli\u003eAfter installation, perform a hover check and confirm there is no vibration or unusual acoustic signature before committing to the mission.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These propellers are built for the DJI Matrice 4D and Matrice 4TD dock-based aircraft only. They are not interchangeable with the standard Matrice 4T \/ 4E propellers (models 1157F and 1154F), or with any other DJI airframe. Confirm your aircraft model before ordering. The Matrice 4D Series uses multiple propeller pairs to make a complete set; this listing is a single pair (1 × CW, 1 × CCW), intended as a replacement or as part of a full set. Refer to the DJI Matrice 4D Series user manual for the full propeller count and the correct CW \/ CCW placement. The aircraft is sold separately.\u003c\/p\u003e\n\n\u003cp\u003eUnder FAA Part 107, a remote pilot in command is responsible for ensuring the aircraft is in a condition for safe operation before each flight (14 CFR 107.49). A current set of undamaged, factory-spec propellers appropriate to the operating environment is part of that preflight determination. Inspect, document, and replace propellers on the schedule appropriate to your operation.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhich aircraft are these propellers compatible with?\u003c\/summary\u003e\n  \u003cp\u003eThe DJI Matrice 4D and Matrice 4TD, the dock-based aircraft in the Matrice 4D Series. They are not compatible with the standard Matrice 4T or Matrice 4E (which use the 1157F and 1154F propellers), or with any other DJI airframe.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat does the anti-ice coating do?\u003c\/summary\u003e\n  \u003cp\u003eThe blades carry an integrated anti-ice coating that helps prevent ice from building up on the blade surface, supporting more stable flight in freezing rain and cold-weather conditions. It is a coating that resists ice accumulation, not a heated de-icing system.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow often should I replace them?\u003c\/summary\u003e\n  \u003cp\u003eDJI recommends replacing these propellers after 450 flights to maintain anti-ice performance. Replace sooner if a blade shows visible damage during preflight inspection, or immediately after any prop strike or hard landing even if no damage is visible.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I clean them with solvents?\u003c\/summary\u003e\n  \u003cp\u003eNo. Avoid oil- or alcohol-based solvents, as they may damage the anti-ice coating. Use a soft, dry cloth.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow many propellers make a full set?\u003c\/summary\u003e\n  \u003cp\u003eThe Matrice 4D Series uses multiple propeller pairs to make a full set, with each motor location requiring a specific CW or CCW blade. This listing is a single pair (1 × CW, 1 × CCW). To re-prop the entire aircraft you will need enough pairs to cover every rotor position. Refer to the DJI Matrice 4D Series user manual for the total count and correct placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDo I need to replace the mounting hardware too?\u003c\/summary\u003e\n  \u003cp\u003eDJI advises replacing the washers and screws when you replace the propellers. Install per the Matrice 4D Series user manual and confirm all hardware is fully seated before flight.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan these propellers be repaired?\u003c\/summary\u003e\n  \u003cp\u003eNo. Composite propellers should not be field-repaired with adhesives or fillers. A damaged blade has compromised structural integrity and unpredictable balance, both of which create real risk in flight. Replace damaged propellers; do not repair them.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":52369056039229,"sku":null,"price":43.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/djimatrice4dlownoiseantiicingpropellerpair.webp?v=1785176281","url":"https:\/\/www.terrestrialimaging.com\/products\/dji-matrice-4d-low-noise-anti-icing-propeller-pair","provider":"Terrestrial Imaging","version":"1.0","type":"link"}