{"product_id":"dji-matrice-400-third-gimbal-connector","title":"DJI Matrice 400 Third Gimbal Connector","description":"\u003cp\u003eThe DJI Matrice 400 Third Gimbal Connector is a heavy-payload mount that attaches to the underside of the Matrice 400 and connects to the aircraft's E-Port V2 (positions E3 and E4). It adds a third gimbal position for a single stabilized DJI Zenmuse payload or a custom DJI Payload SDK device, and it is the connector rated for the aircraft's full payload capacity: up to 6 kg with screw-lock fastening or 3 kg with the quick-release port. In fact, DJI measures the Matrice 400's 6 kg max payload at this connector. Use it to fly a heavier sensor than the front connectors allow, or to run a third payload alongside a dual-gimbal setup mounted at the front.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eUnderside heavy-payload mount for the DJI Matrice 400. Adds a third gimbal position on the E-Port V2 with up to 6 kg screw-lock or 3 kg quick-release capacity.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdds a third gimbal position on the underside of the Matrice 400 for a single DJI Zenmuse payload or a DJI Payload SDK device\u003c\/li\u003e\n  \u003cli\u003eRated for the aircraft's full payload capacity: up to 6 kg with screw-lock fastening or 3 kg with the quick-release port (6 kg measured at sea level; capacity decreases with altitude)\u003c\/li\u003e\n  \u003cli\u003eConnects to the Matrice 400's E-Port V2 at positions E3 and E4, delivering full data, control, and power through DJI's standard payload bus\u003c\/li\u003e\n  \u003cli\u003eTwo fastening options with different weight ratings: up to 6 kg with screw-lock fastening or 3 kg with the quick-release port\u003c\/li\u003e\n  \u003cli\u003eSupports DJI Zenmuse gimbal cameras and custom payloads built on the DJI Payload SDK, useful for integrators running domain-specific sensors\u003c\/li\u003e\n  \u003cli\u003eCan be combined with a front-mounted single or dual gimbal connector for multi-payload configurations within the aircraft's total payload envelope\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty construction that complements the Matrice 400 airframe\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible aircraft\u003c\/td\u003e\n\u003ctd\u003eDJI Matrice 400\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eYCBZSS00333602\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMounting location\u003c\/td\u003e\n\u003ctd\u003eUnderside of the aircraft\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAircraft interface\u003c\/td\u003e\n\u003ctd\u003eE-Port V2, positions E3 and E4 (120 W single-port power)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax payload (screw-lock)\u003c\/td\u003e\n\u003ctd\u003e6 kg (measured at sea level; decreases with altitude)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax payload (quick-release)\u003c\/td\u003e\n\u003ctd\u003e3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePayload compatibility\u003c\/td\u003e\n\u003ctd\u003eDJI Zenmuse gimbal cameras; DJI Payload SDK devices\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eControl software\u003c\/td\u003e\n\u003ctd\u003eDJI Pilot 2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eGimbal connector options for the Matrice 400\u003c\/h2\u003e\n\u003cp\u003eThe Matrice 400 supports several gimbal connectors, each with a different payload rating. The Third Gimbal Connector is the one to reach for when you need maximum single-payload weight or a payload position on the underside.\u003c\/p\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003cth\u003eMax payload\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSingle gimbal connector\u003c\/td\u003e\n\u003ctd\u003e1400 g (damper lifespan reduced above 950 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDual gimbal connector\u003c\/td\u003e\n\u003ctd\u003e950 g per mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eThird gimbal connector\u003c\/td\u003e\n\u003ctd\u003e6 kg screw-lock \/ 3 kg quick-release\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eZenmuse L3 gimbal connector\u003c\/td\u003e\n\u003ctd\u003e2100 g (damper lifespan reduced above 1600 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatrice 400 operators who need to fly a heavier payload than the top-side single or dual connectors allow\u003c\/li\u003e\n  \u003cli\u003eSurveying, mapping, and inspection crews running large LiDAR, photogrammetry, or specialized sensors that exceed the standard connector weight limits\u003c\/li\u003e\n  \u003cli\u003eIntegrators developing or deploying custom DJI Payload SDK devices that need the underside position and the higher weight rating\u003c\/li\u003e\n  \u003cli\u003eTeams building multi-payload configurations who want a third gimbal position underneath in addition to a front-mounted payload\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × DJI Matrice 400 Third Gimbal Connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation and operational notes\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe Third Gimbal Connector mounts to the underside of the Matrice 400 and connects to the E-Port V2 at positions E3 and E4. Follow the procedure in the DJI Matrice 400 user manual to attach the connector and payload in the correct order.\u003c\/li\u003e\n  \u003cli\u003eChoose the attachment method for the job: screw-lock for the full 6 kg rating and a more secure hold, or quick-release (3 kg) when you need to swap payloads quickly in the field.\u003c\/li\u003e\n  \u003cli\u003eThe 6 kg figure is measured at sea level. Payload capacity decreases as altitude increases. Refer to the user manual for the derating curve at your operating elevation.\u003c\/li\u003e\n  \u003cli\u003eVerify the payload is recognized in DJI Pilot 2 before takeoff and confirm the aircraft's center of gravity is within the manual's tolerance after installation.\u003c\/li\u003e\n  \u003cli\u003eHeavier payloads change the aircraft's flight envelope. Expect reduced flight time and tighter wind-resistance margins versus a lighter configuration.\u003c\/li\u003e\n  \u003cli\u003ePower down the aircraft before installing or removing the connector or payload. DJI's payload interface is not rated for hot-swapping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The Third Gimbal Connector is built for the DJI Matrice 400 only. It is not compatible with the Matrice 350 RTK, Matrice 300 RTK, Matrice 30 Series, Matrice 4 Series, or any other DJI aircraft, which use different payload interfaces. Verify your aircraft model before ordering. Payloads and the aircraft itself are sold separately.\u003c\/p\u003e\n\n\u003cp\u003eAdding a payload does not change the underlying flight rules. Under FAA Part 107, the remote pilot in command is responsible for safe operation of the aircraft and its payload configuration. Confirm that total takeoff weight remains within published limits and that the flight plan accounts for the reduced endurance and wind margins of a heavy-payload configuration.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhich aircraft is the Third Gimbal Connector compatible with?\u003c\/summary\u003e\n  \u003cp\u003eThe DJI Matrice 400 only. It uses the M400's E-Port V2 interface (positions E3 and E4) on the underside of the aircraft and is not compatible with the Matrice 350 RTK, Matrice 300 RTK, Matrice 30 Series, Matrice 4 Series, or any other DJI airframe.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow much weight can it carry?\u003c\/summary\u003e\n  \u003cp\u003eUp to 6 kg with screw-lock fastening, or 3 kg with the quick-release port. The 6 kg figure is measured at sea level; payload capacity decreases as altitude increases. DJI measures the Matrice 400's overall 6 kg max payload at this connector.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat is the difference between screw-lock and quick-release?\u003c\/summary\u003e\n  \u003cp\u003eThey are two fastening methods with different weight ratings. Screw-lock fastening is rated up to 6 kg; the quick-release port is rated up to 3 kg. Choose based on your payload weight.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhich payloads can I run on it?\u003c\/summary\u003e\n  \u003cp\u003eDJI Zenmuse gimbal cameras and custom devices built on the DJI Payload SDK. The underside position and higher weight rating make it suited to larger or heavier sensors. Check the payload compatibility matrix in the Matrice 400 user manual before mounting a specific model, since the supported list evolves with firmware.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I use it together with a front-mounted gimbal?\u003c\/summary\u003e\n  \u003cp\u003eYes. The Third Gimbal Connector uses the underside E-Port V2 positions (E3\/E4), so it can be combined with a front-mounted single or dual gimbal connector for a multi-payload configuration. The combined payloads must stay within the Matrice 400's total payload envelope. Refer to the user manual for supported combinations and total limits.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow does a heavy payload affect flight time?\u003c\/summary\u003e\n  \u003cp\u003eThe Matrice 400's published flight-time figures are measured with a defined payload. A heavier payload increases total takeoff weight, draws more power, and reduces flight time. Plan your mission with reduced endurance and tighter wind margins in mind, and verify expected flight time on the controller before takeoff.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs the connector hot-swappable?\u003c\/summary\u003e\n  \u003cp\u003eNo. DJI's payload interface is not rated for hot-swapping. Power down the aircraft before installing or removing the connector or payload.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":51996193685821,"sku":null,"price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/dji-matrice-400-third-gimbal-against-white-background.webp?v=1784317545","url":"https:\/\/www.terrestrialimaging.com\/products\/dji-matrice-400-third-gimbal-connector","provider":"Terrestrial Imaging","version":"1.0","type":"link"}