MICASENSE REDEDGE-P

STANDALONE KIT

The MicaSense RedEdge-P
The MicaSense RedEdge-MX Blue and Micasense RedEdge-MX
The MicaSense RedEdge-MX front view straight
The MicaSense Kit for dji matrice
MICASENSE 2022 Certified Partner

The new standard for data quality and repeatability

  • Panchromatic Band for Pan-Sharpened Output Resolutions of 2cm (at 60m)
  • 2-3 Triggers Per Second
  • Blue, Green, Red, Red Edge, and Near Infrared Spectral Bands with a Global Shutter
  • Comes with DLS 2 and CRP 2

MicaSense RedEdge-P(TI101108)

Starting at: $7,995.00

IN STOCK

The RedEdge-P offers the same 5 multipsectral bands as the RedEdge-MX with the addition of a sixth panchromatic band which allows for pan-sharpened output resolutions of 2cm (at 60m) - twice the ground resolution of the industry standard RedEdge-MX. In addition to the higher image quality, the RedEdge-P has a capture rate 2x as fast increasing the efficiency of your flights. Included with the sensor is the DLS 2 (down-welling light sensor) and the CRP 2 (calibrated reflectance panel).


Pan-sharpening

The RedEdge-P has a sixth panchromatic band which allows for pan-sharpened outputs of 2cm resolution (at 60m), offering twice the resolution of the industry standard RedEdge-MX.

Capture 2-3 Images Per Second

The RedEdge-P can trigger 2-3 times per second capturing all 6 bands simultaneously allowing for more efficient flight planning. The capture rate is 2x faster than the RedEdge-MX.

5 Spectral Bands

Capture five narrow high resolution spectral bands in one flight: blue, green, red, red edge, and near infrared. This data allows you to monitor and analyze vegetation through RGB imagery, vegetation indices, and digital surface models.

Downwelling Light Sensor

The RedEdge-P comes with a downwelling light sensor. The DLS 2 module features an embedded GPS, 8 light sensors, and 12 directional sensors to maximize accuracy and consistency of data collect throughout varying levels of sunlight.

Calibrated Reflectance Panel

The included CRP 2 has known reflectance values across the visible and near-infrared light spectrum to enable more accurate compensation for incident light conditions. Simply take a picture of the CRP 2 pre and post flight for more accurate data.

The All New MicaSense RedEdge-P

The New Standard For Data Quality And Repeatability

Inquire Now

Fill out the form below or give us a call regarding the Micasense RedEdge-P payload!

Check Us Out On Youtube

Stay up to date with Terrestrial Imaging's latest videos

Watch Now

Need Some Help?

Reach out to us anytime via our form or call us at: 1-800-FLY-0530

Contact Us