{"title":"Cases","description":"","products":[{"product_id":"gpc-soft-bag-for-dji-d-rtk-2-tripod","title":"GPC Soft Bag For DJI D-RTK 2 Tripod","description":"\u003cspan data-mce-fragment=\"1\"\u003eGo Professional Case's D-RTK 2 heavy duty tripod bag is designed to protect and store your tripod during \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003etransportation. The soft bag is a great alternative to a hard case because of the smaller size and lighter weight. The strap and handle make it easy to carry, and the bright orange color is great for visibility.\u003c\/span\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":47046056575293,"sku":"TI100829","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/dji-rtk-tripod-bag-1.jpg?v=1712063980"},{"product_id":"gpc-matrice-300-rtk-battery-case","title":"GPC DJI Matrice 300 RTK 6 Battery Case","description":"\u003cp\u003eThe GPC Matrice 300 6 Battery Case is a hard-shell, watertight, MIL-spec carrying case built specifically to hold six DJI TB60 (Matrice 300 RTK) or TB65 (Matrice 350 RTK) Intelligent Flight Batteries. Water-jet precision-cut closed-cell foam holds each battery in its own cavity so the packs cannot shift, contact each other, or short during transport. The SKB military-spec shell adds impact, environmental, and ingress protection rated to the same military standards used by U.S. defense and industrial customers. Three full battery rotations for an M300 \/ M350 — twelve flights worth of power — travel between sites in a single 7-pound case, padlockable, and made in the USA.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eUSA-made watertight hard case for six DJI TB60 or TB65 flight batteries. Fits the M300 RTK and M350 RTK battery family. MIL-spec construction, padlockable, lifetime replacement guarantee.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHolds six DJI TB60 batteries (Matrice 300 RTK) or six DJI TB65 batteries (Matrice 350 RTK) in dedicated foam cavities, each pack isolated from the others\u003c\/li\u003e\n  \u003cli\u003eSKB military-spec hard-shell case, made in the USA, with water-jet precision-cut closed-cell foam tooled to the TB60 \/ TB65 battery dimensions\u003c\/li\u003e\n  \u003cli\u003eWatertight and dust tight construction (MIL-C-4150J), resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F), and rated for impact protection (MIL-STD-810F)\u003c\/li\u003e\n  \u003cli\u003ePadlock-ready: padlock holes are reinforced with stainless steel padlock protector clips, so the case can be secured against tampering in vehicles, hotels, or hangars\u003c\/li\u003e\n  \u003cli\u003eMolded-in hinge and trigger-release latch system, sized for the daily open-close cycles of an active enterprise drone program\u003c\/li\u003e\n  \u003cli\u003eAmbient pressure equalization valve (MIL-STD-648C) automatically equalizes air pressure during elevation changes or temperature swings\u003c\/li\u003e\n  \u003cli\u003eSnap-down rubber over-molded cushion grip handle for comfortable single-hand carry, even fully loaded\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions designed to fit alongside the GPC Matrice 300 aircraft case in a typical work vehicle, leaving room for other gear\u003c\/li\u003e\n  \u003cli\u003eLifetime replacement guarantee on the case shell and hardware from Go Professional Cases — the same manufacturer that supplies cases for DJI's enterprise drone programs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat it carries\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6 × DJI TB60 Intelligent Flight Batteries (Matrice 300 RTK), \u003cem\u003eor\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e6 × DJI TB65 Intelligent Flight Batteries (Matrice 350 RTK)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eGo Professional Cases (GPC), Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eGPC-DJI-M300-6BTRY\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA (Poway, California)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible batteries\u003c\/td\u003e\n\u003ctd\u003eDJI TB60 (Matrice 300 RTK), DJI TB65 (Matrice 350 RTK)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e6 batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShell\u003c\/td\u003e\n\u003ctd\u003eSKB military-spec hard case\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoam\u003c\/td\u003e\n\u003ctd\u003eWater-jet precision-cut, closed-cell, custom tooled for TB60 \/ TB65 batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eExterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e16.24 × 12.94 × 6.78 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e15.00 × 10.50 × 6.00 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (empty)\u003c\/td\u003e\n\u003ctd\u003e7 lb 0 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e8 lb 0 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWatertight rating\u003c\/td\u003e\n\u003ctd\u003eMIL-C-4150J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-810F (UV, solvents, corrosion, fungus, impact)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePressure equalization\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-648C valve, automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHinge \/ latch system\u003c\/td\u003e\n\u003ctd\u003eMolded-in hinge, trigger-release latches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePadlock holes with stainless steel protector clips (padlocks sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHandle\u003c\/td\u003e\n\u003ctd\u003eSnap-down rubber over-molded cushion grip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime replacement guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatrice 300 RTK and Matrice 350 RTK operators carrying three full battery rotations (six packs) for a long day of inspection, public-safety, or survey work\u003c\/li\u003e\n  \u003cli\u003eFleet operators standardizing battery transport across multiple M300 \/ M350 airframes, where keeping batteries in dedicated padded cavities matters for cycle life and warranty\u003c\/li\u003e\n  \u003cli\u003ePublic-safety, DFR, and emergency-response programs that need to grab one case of batteries and a separate aircraft case, drive to scene, and run sustained operations\u003c\/li\u003e\n  \u003cli\u003eService providers who travel by ground between job sites and need a transport solution that protects valuable batteries from impact, weather, and short-circuit risks\u003c\/li\u003e\n  \u003cli\u003eOperators upgrading from improvised foam-and-pelican setups, mixed cardboard \/ soft case storage, or unprotected battery transport that puts $500+ packs at risk\u003c\/li\u003e\n  \u003cli\u003eFederal, government, and contracted programs that require padlockable, MIL-spec transport for lithium-ion flight batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × GPC Matrice 300 6 Battery Case (hard shell + custom TB60\/TB65 foam insert)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Batteries are sold separately. The case holds six TB60 or TB65 packs and does not include batteries, chargers, or any DJI hardware. Padlocks for the case's lockable holes are also sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eAir travel and lithium-battery shipping\u003c\/h2\u003e\n\u003cp\u003eThe case itself meets carry-on size requirements, but the DJI TB60 (Matrice 300 RTK) and TB65 (Matrice 350 RTK) batteries do not. Each TB60 \/ TB65 pack is approximately 274 Wh — well above the FAA \/ IATA 100 Wh threshold for spare lithium batteries in passenger carry-on, and above the 160 Wh limit that allows airline-approved passenger carry-on with prior authorization. As a result:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTB60 and TB65 batteries cannot travel as carry-on or checked baggage on a commercial passenger flight.\u003c\/li\u003e\n  \u003cli\u003eShipping these batteries between locations requires hazardous materials (Class 9) handling per IATA \/ DOT regulations, with appropriate documentation, packaging, and licensed carriers.\u003c\/li\u003e\n  \u003cli\u003eThe case is sized for vehicle transport, on-site storage, and short ground transfers between staging areas. It is not a solution for shipping the batteries on a passenger flight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOperators traveling to a job site with batteries should plan ground transport, freight shipment, or local rental as appropriate. The aircraft itself and other accessories travel under standard rules; only the high-capacity flight batteries are restricted.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes it fit both TB60 (M300) and TB65 (M350) batteries?\u003c\/summary\u003e\n  \u003cp\u003eYes. The TB60 (Matrice 300 RTK) and TB65 (Matrice 350 RTK) share the same physical form factor, and the case is rated for both. Operators upgrading from an M300 fleet to an M350 fleet — or running mixed configurations — can use the same case for either battery type.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes it really hold six full-size DJI batteries in a 7-pound case?\u003c\/summary\u003e\n  \u003cp\u003eYes. Loaded with six TB60 \/ TB65 batteries, the total weight is roughly 35-40 pounds (the case is 7 pounds empty, plus approximately 1.4 kg \/ 3 pounds per battery × 6). The MIL-spec SKB shell and grip handle are designed to be carried loaded, but most operators use the case in a vehicle and only carry it short distances on foot.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I check this on an airline?\u003c\/summary\u003e\n  \u003cp\u003eThe case meets carry-on size dimensions, but the TB60 \/ TB65 batteries inside it do not meet the FAA \/ IATA limits for passenger air travel. Each pack is approximately 274 Wh — far above the 100 Wh standard carry-on threshold and above the 160 Wh airline-approved limit. Batteries of this size require hazardous materials (Class 9) shipment by an appropriate licensed carrier, not passenger luggage. The case is built for ground transport between sites, not airline travel with batteries inside.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow does it compare to the DJI BS60 charging case?\u003c\/summary\u003e\n  \u003cp\u003eDifferent products for different purposes. The DJI BS60 is an active charging station that recharges TB60 batteries between flights, with built-in power electronics, fans, and a charging interface — and it's not designed for transport. The GPC case is a passive transport and storage solution that protects batteries from impact, environment, and shorts during travel between sites. Many operators use both: the BS60 stays at the staging point for charging, and the GPC case moves batteries between staging areas, vehicles, and hangars.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs the case lockable?\u003c\/summary\u003e\n  \u003cp\u003eYes. The padlock holes are reinforced with stainless steel padlock protector clips. The case is sized to accept standard padlocks (sold separately). For programs that need TSA-compliant locks or specific security ratings, verify the padlock specifications against your organization's policy.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat if a battery damages the foam?\u003c\/summary\u003e\n  \u003cp\u003eThe closed-cell foam is designed for repeated battery-in \/ battery-out cycles and holds its shape over years of use. If you damage the foam or your aircraft configuration changes, GPC offers replacement foam inserts as separate SKUs. The case shell itself is covered by a lifetime replacement guarantee for manufacturing defects.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhere is it made?\u003c\/summary\u003e\n  \u003cp\u003eDesigned and built in Poway, California by Go Professional Cases — the same manufacturer that supplies hard cases for DJI's enterprise drone lineup used by public-safety, surveying, federal, and commercial operators. The shells are SKB military-spec, and the foam is water-jet cut in-house in the United States.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat's the warranty?\u003c\/summary\u003e\n  \u003cp\u003eThe GPC case ships with a lifetime replacement guarantee from Go Professional Cases against manufacturing defects in the shell, hinge, and latch hardware. The foam insert is consumable; replacement foam is available as a separate SKU if needed. Standard exclusions apply for damage from extreme misuse or unauthorized modification.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":47046184632637,"sku":"TI101077","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/gpc-m300-battery-case-with-batteries.jpg?v=1712063829"},{"product_id":"dji-bs30-charging-case-for-matrice-30-series","title":"DJI BS30 Charging Case For Matrice 30 Series","description":"The DJI BS30 Charging case is designed to charge 8 TB30 batteries for the DJI Matrice 30 and the DJI Matrice 30T. The charging case also contains 2 WB37 charging slots. With a USBA, USBC, and maintenance port, the BS30 can charge your controller or other devices and connect to the RC Plus for firmware updates. Keep in mind you can update all of your batteries at once through the BS30 charging case.","brand":"DJI","offers":[{"title":"Default Title","offer_id":47046274023741,"sku":"TI101187","price":1079.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/dji-bs30-charging-case-1_3061238a-dab5-49b2-803e-d7acaad53961.jpg?v=1711988356"},{"product_id":"gpc-dji-matrice-30-series-case","title":"GPC DJI Matrice 30 Series Case","description":"\u003cp\u003eThe GPC DJI Matrice 30 Series Case is a hard-shell, watertight, MIL-spec rolling case built to carry a complete Matrice 30 or Matrice 30T mission kit in a single unit. Water-jet precision-cut closed-cell foam holds the aircraft, two DJI RC Plus controllers with their lanyard brackets and harnesses, six TB30 flight batteries, two WB37 controller batteries, spare propellers, a screwdriver, and a customizable cavity sized for third-party payload accessories like the CZI LP12 spotlight \/ speaker. Industrial-strength injection-molded pull handle and in-line skate wheels make a 35-pound-plus loaded case manageable across parking lots, hangars, and event venues. Made in the USA by Go Professional Cases.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eUSA-made watertight rolling case for the DJI Matrice 30 \/ M30T full mission kit. Aircraft, two RC Plus controllers, six TB30 batteries, two WB37 batteries, spare props, and a customizable payload cavity in one MIL-spec shell.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFull mission kit in one case: M30 or M30T aircraft, both RC Plus controllers, six TB30 flight batteries, two WB37 controller batteries, spare propellers, and customizable payload space\u003c\/li\u003e\n  \u003cli\u003eSKB military-spec hard-shell case, made in the USA, with water-jet precision-cut closed-cell foam tooled specifically for the Matrice 30 Series airframe and accessories\u003c\/li\u003e\n  \u003cli\u003eIndustrial-strength injection-molded pull handle and in-line skate-style wheels — sized for a loaded case that crosses parking lots, hotel lobbies, and hangar floors instead of carrying it\u003c\/li\u003e\n  \u003cli\u003ePadlock-ready: padlock holes are reinforced with stainless steel padlock protector clips for secure transport in vehicles, hotels, and shared facilities\u003c\/li\u003e\n  \u003cli\u003eWatertight and dust tight construction (MIL-C-4150J), resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F), and rated for impact protection (MIL-STD-810F)\u003c\/li\u003e\n  \u003cli\u003eAmbient pressure equalization valve (MIL-STD-648C) automatically equalizes air pressure during elevation changes\u003c\/li\u003e\n  \u003cli\u003eMolded-in hinge and trigger-release latches engineered for daily open-close cycles\u003c\/li\u003e\n  \u003cli\u003eCustomizable cavity for third-party payload accessories — sized to accept add-ons like the CZI LP12 spotlight \/ speaker for public-safety configurations\u003c\/li\u003e\n  \u003cli\u003eSnap-down rubber over-molded cushion grip handle for short carries and lifting in and out of vehicles\u003c\/li\u003e\n  \u003cli\u003eLifetime replacement guarantee from Go Professional Cases on the case shell and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat it carries\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × DJI Matrice 30 or Matrice 30T aircraft\u003c\/li\u003e\n  \u003cli\u003e2 × DJI RC Plus controllers (with lanyard brackets and harnesses)\u003c\/li\u003e\n  \u003cli\u003e6 × DJI TB30 Intelligent Flight Batteries\u003c\/li\u003e\n  \u003cli\u003e2 × DJI WB37 external controller batteries\u003c\/li\u003e\n  \u003cli\u003eSpare propellers\u003c\/li\u003e\n  \u003cli\u003eScrewdriver\u003c\/li\u003e\n  \u003cli\u003e1 × Cavity for GPC LensPen MicroPro (sold separately)\u003c\/li\u003e\n  \u003cli\u003e1 × Cavity for GPC Micro SD Card Holder (sold separately)\u003c\/li\u003e\n  \u003cli\u003eCustomizable cavity for third-party payload accessories (e.g., CZI LP12 spotlight \/ speaker)\u003c\/li\u003e\n  \u003cli\u003eMiscellaneous items (cables, USB chargers, small accessories)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eGo Professional Cases (GPC), Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eGPC-DJI-M30\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA (Poway, California)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible aircraft\u003c\/td\u003e\n\u003ctd\u003eDJI Matrice 30, Matrice 30T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShell\u003c\/td\u003e\n\u003ctd\u003eSKB military-spec hard case\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoam\u003c\/td\u003e\n\u003ctd\u003eWater-jet precision-cut, closed-cell, tooled for the M30 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eExterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e24.50 × 19.37 × 12.22 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e22.00 × 17.00 × 10.50 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (empty)\u003c\/td\u003e\n\u003ctd\u003e19 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e22 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWheels\u003c\/td\u003e\n\u003ctd\u003eIn-line skate-style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePull handle\u003c\/td\u003e\n\u003ctd\u003eIndustrial-strength injection-molded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWatertight rating\u003c\/td\u003e\n\u003ctd\u003eMIL-C-4150J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-810F (UV, solvents, corrosion, fungus, impact)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePressure equalization\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-648C valve, automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHinge \/ latch system\u003c\/td\u003e\n\u003ctd\u003eMolded-in hinge, trigger-release latches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePadlock holes with stainless steel protector clips (padlocks sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSide handle\u003c\/td\u003e\n\u003ctd\u003eSnap-down rubber over-molded cushion grip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime replacement guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatrice 30 \/ M30T operators carrying the full mission kit — aircraft, batteries, controllers, payloads — between staging areas, vehicles, and job sites\u003c\/li\u003e\n  \u003cli\u003ePublic-safety, DFR, fire-service, and search-and-rescue programs that need to roll a complete kit out of the truck and into operation in under five minutes\u003c\/li\u003e\n  \u003cli\u003eInspection, utility, and survey crews moving the M30 platform daily across multiple sites, where a wheeled case is meaningfully more practical than carrying loose components\u003c\/li\u003e\n  \u003cli\u003eFleet operators standardizing transport across multiple M30 \/ M30T airframes, where keeping the aircraft, controllers, and batteries in a single hard case simplifies fleet management\u003c\/li\u003e\n  \u003cli\u003ePrograms running the CZI LP12 spotlight \/ speaker or other third-party payloads on the M30, where the customizable cavity holds the accessory in the same case as the aircraft\u003c\/li\u003e\n  \u003cli\u003eOperators upgrading from the stock DJI carrying case or improvised foam-and-pelican setups that don't accommodate the full mission kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × GPC DJI Matrice 30 Series Case (hard shell + custom M30 foam insert)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The aircraft, controllers, batteries, propellers, charger, payloads, and other accessories are sold separately. The GPC LensPen MicroPro and GPC Micro SD Card Holder are also sold separately — the case has cavities pre-cut for them, but the accessories themselves are not included. Padlocks for the case's lockable holes are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eAir travel and lithium-battery shipping\u003c\/h2\u003e\n\u003cp\u003eThe case can be checked on commercial airlines, though specific airline rules govern checked baggage size limits and weight surcharges. Lithium-battery air travel rules apply separately:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThe TB30 (M30 \/ M30T flight battery) is 131.6 Wh per pack — above the FAA \/ IATA 100 Wh standard carry-on threshold but below the 160 Wh limit that allows airline-approved passenger carry-on with prior authorization. Each airline handles 100-160 Wh batteries differently; obtain written approval before traveling.\u003c\/li\u003e\n  \u003cli\u003eThe WB37 (controller battery) is 37.39 Wh per pack and travels under standard rules (sub-100 Wh batteries are normal carry-on items, up to ~20 spares per passenger).\u003c\/li\u003e\n  \u003cli\u003eSpare lithium batteries of any capacity are not permitted in checked baggage. If you check the case, remove all batteries and carry them on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMost operators traveling by air check the case empty (aircraft and accessories inside, batteries removed) and carry the batteries on. Confirm rules with your specific airline before traveling, particularly for the TB30 packs.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes it fit both the Matrice 30 and Matrice 30T?\u003c\/summary\u003e\n  \u003cp\u003eYes. The M30 (basic) and M30T (thermal) share the same airframe, and the foam cavities accommodate both. Operators running mixed M30 \/ M30T fleets can use the same case for either aircraft.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill my CZI LP12 spotlight \/ speaker fit in the case?\u003c\/summary\u003e\n  \u003cp\u003eThe customizable cavity in the GPC M30 Series case is sized to accept third-party payload accessories like the CZI LP12. Most operators carrying an LP12 alongside the M30 use this cavity to keep both in the same case. Verify the cavity dimensions against your specific LP12 unit before relying on the fit, and contact us if you need custom foam cuts for non-standard configurations.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow heavy is the case when fully loaded?\u003c\/summary\u003e\n  \u003cp\u003eEmpty weight is 19 pounds. Fully loaded with the M30 \/ M30T (~3.8 kg), two RC Plus controllers (~1.15 kg each), six TB30 batteries (~685 g each), two WB37 batteries (~155 g each), and accessories, total weight is approximately 35-40 pounds. The in-line skate wheels and pull handle are designed for that load — most operators wheel it rather than carry it. The cushion grip side handle is for short lifts in and out of vehicles.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I check this on an airline?\u003c\/summary\u003e\n  \u003cp\u003eThe case is rated for the impact and environmental stresses of airline checked baggage. Whether the airline accepts it depends on their checked baggage size and weight limits — exterior dimensions are 24.50 × 19.37 × 12.22 in, which exceeds standard carry-on size, so the case is checked baggage in most cases. Lithium batteries are a separate matter: TB30 (131.6 Wh) packs require airline approval and must travel in carry-on, not checked baggage; WB37 (37.39 Wh) packs travel as standard carry-on. Verify rules with your specific airline before traveling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs it lockable?\u003c\/summary\u003e\n  \u003cp\u003eYes. The padlock holes are reinforced with stainless steel padlock protector clips. The case accepts standard padlocks (sold separately). For programs that need TSA-compliant locks or specific security ratings, verify the padlock specifications against your organization's policy.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat if the foam cavities don't match my exact accessory configuration?\u003c\/summary\u003e\n  \u003cp\u003eThe case is tooled for the standard M30 mission kit, including the third-party payload cavity. If your configuration is non-standard — different controllers, additional batteries, custom payloads — GPC offers custom foam cut to order, or you can pluck-and-pull within the existing closed-cell foam in the customizable section. Contact us if you need a fully custom foam insert.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow does this compare to the GPC Matrice 30 Compact Case?\u003c\/summary\u003e\n  \u003cp\u003eGPC also sells a smaller \"DJI Matrice 30 Compact Case\" with the same airframe + battery capacity but a smaller footprint and no wheels. The compact case is a better choice for operators who prioritize a smaller carry over the wheeled convenience. This larger M30 Series case is the right choice for operators who want the customizable payload cavity, the wheeled design, and more room for accessories.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhere is it made?\u003c\/summary\u003e\n  \u003cp\u003eDesigned and built in Poway, California by Go Professional Cases — the same manufacturer that supplies hard cases for DJI's enterprise drone lineup used by public-safety, surveying, federal, and commercial operators. The shells are SKB military-spec, and the foam is water-jet cut in-house in the United States.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat's the warranty?\u003c\/summary\u003e\n  \u003cp\u003eThe GPC case ships with a lifetime replacement guarantee from Go Professional Cases against manufacturing defects in the shell, hinge, latch hardware, and wheels. The foam insert is consumable; replacement foam is available as a separate SKU if needed. Standard exclusions apply for damage from extreme misuse or unauthorized modification.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":47051067687229,"sku":"TI11091","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/gpc-m30-case-1.jpg?v=1712063284"},{"product_id":"gpc-ten-tb30-battery-case-for-dji-matrice-30-series","title":"GPC Ten TB30 Battery Case for DJI Matrice 30 Series","description":"\u003cspan data-mce-fragment=\"1\"\u003eThe stock case for the DJI Matrice 30 series can store a maximum of 15 batteries, which makes the GPC ten battery case a great addition to your kit. The battery case can store 10 TB30s and 5 WB37 batteries.\u003c\/span\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":47051077353789,"sku":"TI11092","price":259.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/m30-ten-battery-case.jpg?v=1712064011"},{"product_id":"gpc-dji-matrice-30-series-backpack","title":"GPC DJI Matrice 30 Series Backpack","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe GPC DJI Matrice 30 series backpack can store the aircraft, two DJI RC Plus controllers, and 6 additional TB30 intelligent flight batteries. The backpack is lightweight with a zippered covered panel for the straps, and has easy access side panels for tools and cables.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-contrast=\"auto\" data-mce-fragment=\"1\"\u003e*Note color of pack may be dark navy or black subject to availability.\u003c\/span\u003e\u003c\/div\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":47051085381949,"sku":"TI11111","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/gpc-dji-matrice-30-backpack-1.jpg?v=1712063221"},{"product_id":"gpc-dji-avata-case","title":"GPC DJI Avata Case","description":"A rugged hard case to organize your new DJI Avata drone to get you up in the air quickly.  Your case packs the DJI Avata Combo configuration which includes Goggles Integra or Goggles 2, 4 spare Intelligent Flight Batteries, Charging Hub, Standard Controller \u0026amp; the RC Motion 2 or Motion Controller, spare props, and much more.","brand":"GPC","offers":[{"title":"Default Title","offer_id":47738400276797,"sku":"TI11113","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPC-DJI-AVATA.jpg?v=1712063183"},{"product_id":"dji-bs65-intelligent-battery-station","title":"DJI BS65 Intelligent Battery Station","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe battery station is a one-stop solution for battery charging, storage, and transport. The new Storage Mode and Ready-to-Fly Mode improve charging efficiency and extend the battery life. The new 360°-movement wheels facilitate more convenient transportation and transitions. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe battery station provides eight TB65 battery ports, four WB37 battery ports, one USB-C maintenance port, one USB-C charging port, and one USB-A charging port. It can charge up to two TB65 batteries and one WB37 battery simultaneously.\u003c\/span\u003e\u003c\/p\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":48261842403645,"sku":"","price":2509.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/DJIBS65chargingcaseopenfullcase.jpg?v=1712324488"},{"product_id":"gpc-dji-mavic-3e-survey-kit","title":"GPC DJI Mavic 3E Survey Kit Case","description":"\u003cspan data-mce-fragment=\"1\"\u003eThis work horse of a Mavic 3 Enterprise series travels a lot of valuable accessories. This case packs a punch with the Mavic 3 Enterprise, RTK Ground station, plenty of batteries for both, chargers and much more.  This case keeps all the items secure and well organized. We also know that quick deploy is important, therefore we have designed the Mavic 3 cavity to keep the props on. We also designed it knowing that the tripod with the pole are very robust to travel on their own with little protection.\u003c\/span\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48299525603645,"sku":"","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCM3ERTKcase.jpg?v=1712589570"},{"product_id":"gpc-dji-matrice-300-v2-case","title":"GPC DJI Matrice 300 V2 Case","description":"\u003cp\u003eThe GPC DJI M300 Hard Case V2 is the updated version of GPC's full-kit rolling case for the DJI Matrice 300 RTK, with a redesigned payload tray that accommodates the modern DJI Zenmuse lineup: Zenmuse L1 LiDAR, P1 photogrammetry, H20, H20T, H20N, and the Wingsland Z15 spotlight. The same MIL-spec SKB shell, inline wheels, and lifetime replacement guarantee as the V1, but the foam is tooled around the payloads operators are flying today rather than the older Z30 \/ XT2 generation. Carries four flights worth of TB60 batteries (eight packs), two controllers, two controller batteries, spare props, and accessories in one watertight case. Made in the USA.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eUSA-made MIL-spec rolling case for the DJI Matrice 300 RTK. Updated payload tray for L1, P1, H20, H20T, H20N, and Z15. Eight TB60 batteries, two controllers, spare props, accessories — full mission kit in one SKB-spec shell.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFull M300 RTK mission kit in one rolling case: aircraft, eight TB60 flight batteries (four full rotations), two controllers, two controller batteries, updated payload tray, spare props, and accessory cavities\u003c\/li\u003e\n  \u003cli\u003eUpdated removable payload tray with water-jet precision-cut cavities for the DJI Zenmuse L1 LiDAR, Zenmuse P1 photogrammetry camera, Zenmuse H20, H20T, H20N, and Wingsland Z15 spotlight — the M300 RTK's primary payload lineup since 2021\u003c\/li\u003e\n  \u003cli\u003eSame SKB military-spec hard-shell case as the original V1, made in the USA, with water-jet precision-cut closed-cell foam tooled for the current M300 RTK kit\u003c\/li\u003e\n  \u003cli\u003eIndustrial-strength pull handle and inline skate-style wheels — sized for a 28-pound empty case that loads to 70+ pounds with a full battery and payload complement\u003c\/li\u003e\n  \u003cli\u003ePadlock-ready: padlock holes are reinforced with stainless steel padlock protector clips for secure transport in vehicles, hotels, and shared facilities\u003c\/li\u003e\n  \u003cli\u003eWatertight and dust tight construction (MIL-C-4150J), resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F), and rated for impact protection (MIL-STD-810F)\u003c\/li\u003e\n  \u003cli\u003eAmbient pressure equalization valve (MIL-STD-648C) automatically equalizes air pressure during elevation changes\u003c\/li\u003e\n  \u003cli\u003eMolded-in hinge and trigger-release latches engineered for daily open-close cycles\u003c\/li\u003e\n  \u003cli\u003eTwo accessory cavities under the payload tray for cables, USB chargers, and small accessories\u003c\/li\u003e\n  \u003cli\u003eReplacement payload tray sold separately if you need to upgrade an existing V1 case to V2 payload compatibility without buying a complete new case\u003c\/li\u003e\n  \u003cli\u003eLifetime replacement guarantee from Go Professional Cases on the case shell and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat it carries\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × DJI Matrice 300 RTK aircraft (with batteries installed for storage)\u003c\/li\u003e\n  \u003cli\u003e8 × DJI TB60 Intelligent Flight Batteries (four flight rotations)\u003c\/li\u003e\n  \u003cli\u003e2 × DJI Smart Controller Enterprise (with the option to keep DJI lanyard attached)\u003c\/li\u003e\n  \u003cli\u003e2 × WB37 controller batteries\u003c\/li\u003e\n  \u003cli\u003eSpare propellers\u003c\/li\u003e\n  \u003cli\u003eRemovable updated payload tray for one of: DJI Zenmuse L1, P1, H20, H20T, H20N, or Wingsland Z15 (pluck the perforated foam to combine cavities for other configurations)\u003c\/li\u003e\n  \u003cli\u003e2 × Cavities for accessories under the payload tray\u003c\/li\u003e\n  \u003cli\u003e1 × Cavity for GPC LensPen MicroPro (sold separately)\u003c\/li\u003e\n  \u003cli\u003e1 × Cavity for GPC Micro SD Card Holder (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eGo Professional Cases (GPC), Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eGPC-DJI-M300-V2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA (Poway, California)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible aircraft\u003c\/td\u003e\n\u003ctd\u003eDJI Matrice 300 RTK\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShell\u003c\/td\u003e\n\u003ctd\u003eSKB military-spec hard case\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoam\u003c\/td\u003e\n\u003ctd\u003eWater-jet precision-cut, closed-cell, tooled for the current M300 RTK kit with updated payload tray\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eExterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e26.50 × 26.54 × 15.65 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e24.00 × 24.00 × 14.00 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (empty)\u003c\/td\u003e\n\u003ctd\u003e28 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWheels\u003c\/td\u003e\n\u003ctd\u003eInline skate-style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePull handle\u003c\/td\u003e\n\u003ctd\u003eIndustrial-strength\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWatertight rating\u003c\/td\u003e\n\u003ctd\u003eMIL-C-4150J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-810F (UV, solvents, corrosion, fungus, impact)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePressure equalization\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-648C valve, automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHinge \/ latch system\u003c\/td\u003e\n\u003ctd\u003eMolded-in hinge, trigger-release latches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePadlock holes with stainless steel protector clips (padlocks sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSide handle\u003c\/td\u003e\n\u003ctd\u003eSnap-down rubber over-molded cushion grip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime replacement guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eV1 vs. V2: which one is right for me?\u003c\/h2\u003e\n\u003cp\u003eBoth versions share the same SKB shell, dimensions, weight, wheel design, controller cavities, battery cavities, and accessory layout. The difference is the payload tray:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eV1 payload tray\u003c\/strong\u003e is tooled for the original M300 Zenmuse lineup: H20, H20T, Z15, Zenmuse Z30, and FLIR XT2 — payloads released around 2020 and earlier.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eV2 payload tray\u003c\/strong\u003e (this product) is tooled for the current M300 RTK lineup: Zenmuse L1 LiDAR, P1 photogrammetry, H20, H20T, H20N night vision, and Wingsland Z15 — payloads released from 2021 onward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose the V2 if you're flying the L1, P1, or H20N on your M300 RTK. Choose the V1 if you're still on the legacy Z30 \/ XT2 payloads. If you have a V1 case and have upgraded your payloads since, GPC sells the V2 payload tray as a separate replacement SKU — you can swap the tray without replacing the whole case.\u003c\/p\u003e\n\n\u003ch2\u003eWhat about the Matrice 350 RTK or RC Plus controllers?\u003c\/h2\u003e\n\u003cp\u003eThe V2 case (like the V1) is tooled around the M300 RTK kit with the Smart Controller Enterprise. The Matrice 350 RTK ships with the larger DJI RC Plus controller, which doesn't match the V2 controller cavities. For an M350 RTK with RC Plus, the correct GPC product is the \u003cstrong\u003eGPC DJI Matrice 350 Case\u003c\/strong\u003e (separate SKU). If you're running an M350 RTK with the legacy Smart Controller Enterprise (uncommon but possible), the V2 may still work — contact us to confirm fit before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatrice 300 RTK operators flying current-generation Zenmuse payloads (L1, P1, H20, H20T, H20N) who want a case tooled specifically for that configuration\u003c\/li\u003e\n  \u003cli\u003eSurveying and mapping crews running Zenmuse L1 LiDAR or P1 photogrammetry on an M300 RTK, where the case needs to protect both the aircraft and the precision payload\u003c\/li\u003e\n  \u003cli\u003ePublic-safety and law-enforcement programs running H20N for night-vision missions, where the case carries a complete kit including the specialized payload\u003c\/li\u003e\n  \u003cli\u003eFleet operators with existing M300 RTK programs that have transitioned from older H20-only configurations to mixed L1 \/ P1 \/ H20-series fleets\u003c\/li\u003e\n  \u003cli\u003eOperators upgrading from the V1 payload tray to support newer payloads without replacing the whole case (V2 tray sold separately)\u003c\/li\u003e\n  \u003cli\u003ePublic-safety, inspection, and utility programs that need a USA-made MIL-spec alternative to manufacturer-supplied cases with a lifetime replacement guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × GPC DJI M300 Hard Case V2 (hard shell + custom M300 RTK foam insert with updated removable payload tray)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The aircraft, controllers, batteries, propellers, charger, payloads, and other accessories are sold separately. The GPC LensPen MicroPro and GPC Micro SD Card Holder are also sold separately — the case has cavities pre-cut for them, but the accessories themselves are not included. Padlocks for the case's lockable holes are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat's the difference between the V1 and V2 cases?\u003c\/summary\u003e\n  \u003cp\u003eSame SKB shell, same dimensions, same wheels, same MIL-spec ratings, same controller and battery cavities. The difference is the removable payload tray. The V1 tray is cut for H20, H20T, Z15, Z30, and FLIR XT2 — DJI's older M200\/M300 payload lineup. The V2 tray (this product) is cut for L1, P1, H20, H20T, H20N, and Z15 — the modern M300 RTK payload lineup. Pick the V2 if you're flying L1 or P1 or H20N; pick the V1 if you're still on Z30 \/ XT2.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I upgrade my V1 case to V2 payload compatibility?\u003c\/summary\u003e\n  \u003cp\u003eYes. GPC sells the V2 payload tray as a separate \"DJI Matrice 300 V2 Payload Tray Replacement\" SKU. If you already have a V1 case, you can buy just the updated tray and install it in your existing shell — you don't need to replace the whole case. Contact us to order the tray separately.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes the V2 work with the DJI RC Plus controller?\u003c\/summary\u003e\n  \u003cp\u003eThe V2 case is tooled around the Smart Controller Enterprise that originally shipped with the M300 RTK. The DJI RC Plus is a different controller (larger, with WB37 external batteries), and it doesn't match the V2's controller cavities cleanly. For M350 RTK kits with RC Plus, GPC sells the separate \"DJI Matrice 350 Case\" — that's the correct product if your kit uses the RC Plus.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes the V2 payload tray fit the Zenmuse H30 or H30T?\u003c\/summary\u003e\n  \u003cp\u003eThe V2 tray is cut for L1, P1, H20, H20T, H20N, and Z15. The newer H30 and H30T payloads (released 2024) have different dimensions and may not seat correctly in the V2 tray. GPC produces updated trays for newer payload generations; for H30-series compatibility, contact us about current tray options or a custom foam configuration.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow heavy is the case when fully loaded?\u003c\/summary\u003e\n  \u003cp\u003eEmpty weight is 28 pounds. Loaded with the M300 RTK aircraft (~6.3 kg \/ 14 lb), eight TB60 batteries (~1.35 kg \/ 3 lb each, ~24 lb total), two controllers, two WB37 batteries, payloads, and accessories, total weight is approximately 70-80 pounds. The inline skate wheels and pull handle are designed for that load — wheel the case rather than carrying it. The cushion grip side handle is for short lifts in and out of vehicles.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I check this on an airline?\u003c\/summary\u003e\n  \u003cp\u003eThe case shell is rated for the impact and environmental stresses of airline checked baggage, but the exterior dimensions (26.5 × 26.5 × 15.7 in) plus the loaded weight exceed standard checked baggage limits on most commercial airlines. Expect oversized\/overweight surcharges and verify with your specific airline before traveling. Lithium-battery restrictions also apply: TB60 batteries are ~274 Wh each, far above the FAA \/ IATA 100 Wh threshold, and cannot fly as carry-on or checked baggage on a commercial passenger flight. TB60 batteries require Class 9 hazardous materials shipment by a licensed freight carrier.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs the case lockable?\u003c\/summary\u003e\n  \u003cp\u003eYes. The padlock holes are reinforced with stainless steel padlock protector clips. The case accepts standard padlocks (sold separately). For programs that need TSA-compliant locks or specific security ratings, verify the padlock specifications against your organization's policy.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I customize the foam?\u003c\/summary\u003e\n  \u003cp\u003eThe V2 foam is tooled for the standard M300 RTK kit, including the removable payload tray with perforated cavities for individual Zenmuse payloads. If you don't carry one of the supported payloads, you can pluck the perforated foam to convert the cavity to general storage. For fully custom foam cuts, GPC offers custom foam services as a separate order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhere is it made?\u003c\/summary\u003e\n  \u003cp\u003eDesigned and built in Poway, California by Go Professional Cases — the same manufacturer that supplies hard cases for DJI's enterprise drone lineup used by public-safety, surveying, federal, and commercial operators. The shells are SKB military-spec, and the foam is water-jet cut in-house in the United States.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat's the warranty?\u003c\/summary\u003e\n  \u003cp\u003eThe GPC case ships with a lifetime replacement guarantee from Go Professional Cases against manufacturing defects in the shell, hinge, latch hardware, and wheels. The foam insert and payload tray are consumable; replacement foam and trays are available as separate SKUs. Standard exclusions apply for damage from extreme misuse or unauthorized modification.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48299693834557,"sku":"","price":925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCM300V2Case.jpg?v=1712590447"},{"product_id":"gpc-dji-m30-12-battery-case","title":"GPC DJI M30 12 Battery Case","description":"\u003cp\u003eThe GPC DJI M30 12 Battery Case is a wheeled, watertight, MIL-spec carrying case built to hold twelve TB30 flight batteries, four WB37 controller batteries, one DJI RC Plus remote controller, and a miscellaneous accessory cavity for the DJI Matrice 30 Series. Designed as the natural companion to the GPC M30 Series aircraft case, this battery-only case extends an M30 \/ M30T program from a half-day kit to a full-day operation — six full battery rotations on the aircraft, plus four extended controller batteries, all in one watertight SKB shell. Made in the USA, padlock-ready, and backed by a lifetime replacement guarantee.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eUSA-made wheeled battery case for the DJI Matrice 30 Series. Twelve TB30 flight batteries, four WB37 controller batteries, one DJI RC Plus, and accessory cavity in a single MIL-spec shell.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTwelve dedicated foam cavities for the DJI TB30 Intelligent Flight Batteries — six full rotations on a Matrice 30 \/ M30T, enough power for a sustained mission day without returning to a charging station\u003c\/li\u003e\n  \u003cli\u003eFour additional cavities for DJI WB37 controller batteries, the external battery used by the DJI RC Plus controller for extended runtime\u003c\/li\u003e\n  \u003cli\u003eDedicated cavity for the DJI RC Plus remote controller, so the case can travel as a complete battery-and-controller kit alongside the aircraft case\u003c\/li\u003e\n  \u003cli\u003eMiscellaneous accessory cavity for cables, chargers, USB plugs, and small items the operator picks up over time\u003c\/li\u003e\n  \u003cli\u003eSKB military-spec hard-shell case, made in the USA, with water-jet precision-cut closed-cell foam tooled for the TB30, WB37, and RC Plus dimensions\u003c\/li\u003e\n  \u003cli\u003eInline skate-style wheels and pull handle — sized for a 13-pound empty case that loads to 40+ pounds with a full battery complement\u003c\/li\u003e\n  \u003cli\u003ePadlock-ready: padlock holes are reinforced with stainless steel padlock protector clips, so the case can be secured against tampering in vehicles, hotels, and shared facilities\u003c\/li\u003e\n  \u003cli\u003eWatertight and dust tight construction (MIL-C-4150J), resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F), and rated for impact protection (MIL-STD-810F)\u003c\/li\u003e\n  \u003cli\u003eAmbient pressure equalization valve (MIL-STD-648C) automatically equalizes air pressure during elevation changes\u003c\/li\u003e\n  \u003cli\u003eMolded-in hinge and trigger-release latches engineered for daily open-close cycles\u003c\/li\u003e\n  \u003cli\u003eLifetime replacement guarantee from Go Professional Cases on the case shell and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat it carries\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e12 × DJI TB30 Intelligent Flight Batteries (six flight rotations for the M30 \/ M30T)\u003c\/li\u003e\n  \u003cli\u003e4 × DJI WB37 controller batteries (external batteries for the DJI RC Plus)\u003c\/li\u003e\n  \u003cli\u003e1 × DJI RC Plus Remote Controller\u003c\/li\u003e\n  \u003cli\u003e1 × Miscellaneous accessory cavity for cables, chargers, USB plugs, and small accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eGo Professional Cases (GPC), Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eGPC-DJI-M30-12BTRY\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA (Poway, California)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible batteries\u003c\/td\u003e\n\u003ctd\u003eDJI TB30 (Matrice 30 \/ M30T flight battery), DJI WB37 (RC Plus controller battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible controller\u003c\/td\u003e\n\u003ctd\u003eDJI RC Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBattery capacity\u003c\/td\u003e\n\u003ctd\u003e12 × TB30 + 4 × WB37\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShell\u003c\/td\u003e\n\u003ctd\u003eSKB military-spec hard case\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoam\u003c\/td\u003e\n\u003ctd\u003eWater-jet precision-cut, closed-cell, tooled for TB30, WB37, and RC Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eExterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e21.75 × 13.755 × 9.00 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e20.375 × 11.50 × 5.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (empty)\u003c\/td\u003e\n\u003ctd\u003e13 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e14 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWheels\u003c\/td\u003e\n\u003ctd\u003eInline skate-style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePull handle\u003c\/td\u003e\n\u003ctd\u003eIndustrial-strength\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWatertight rating\u003c\/td\u003e\n\u003ctd\u003eMIL-C-4150J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-810F (UV, solvents, corrosion, fungus, impact)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePressure equalization\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-648C valve, automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHinge \/ latch system\u003c\/td\u003e\n\u003ctd\u003eMolded-in hinge, trigger-release latches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePadlock holes with stainless steel protector clips (padlocks sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime replacement guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatrice 30 \/ M30T operators running full-day public-safety, fire-service, or DFR operations where twelve TB30 batteries cover six aircraft rotations without returning to a base charger\u003c\/li\u003e\n  \u003cli\u003eFleet operators standardizing battery transport across multiple M30 \/ M30T airframes, where keeping batteries in dedicated padded cavities matters for cycle life and warranty\u003c\/li\u003e\n  \u003cli\u003ePublic-safety, emergency-management, and search-and-rescue programs that need sustained airborne presence and can rotate batteries through the case as ground crews charge the depleted packs\u003c\/li\u003e\n  \u003cli\u003eInspection, utility, and survey crews running long sites where reducing trips back to the staging area means more time on target\u003c\/li\u003e\n  \u003cli\u003eTraining programs running multiple pilots through an M30 \/ M30T platform in a single day, where the battery case carries the controller and all the flight power in one rolling unit\u003c\/li\u003e\n  \u003cli\u003eOperators pairing this case with the GPC M30 Series aircraft case for a complete two-case kit: one aircraft case, one battery case, full mission ready\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × GPC DJI M30 12 Battery Wheeled Case (hard shell + custom TB30 \/ WB37 \/ RC Plus foam insert)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Batteries are sold separately. The case holds twelve TB30 packs, four WB37 packs, and one RC Plus controller — none of these are included with the case. Padlocks for the case's lockable holes are also sold separately.\u003c\/p\u003e\n\n\u003ch2\u003ePairing with the GPC M30 Series aircraft case\u003c\/h2\u003e\n\u003cp\u003eThis battery case is designed as a companion to the GPC DJI Matrice 30 Series aircraft case (sold separately). Together, the two cases form a complete fleet transport solution:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAircraft case (sold separately):\u003c\/strong\u003e M30 \/ M30T airframe, two RC Plus controllers, six TB30 batteries, two WB37 batteries, spare props, screwdriver, and customizable payload accessory cavity (e.g., CZI LP12)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThis battery case:\u003c\/strong\u003e Twelve additional TB30 batteries, four additional WB37 batteries, one additional RC Plus controller, and accessory cavity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTogether, the two-case kit gives you the M30 \/ M30T, two RC Plus controllers (plus a third in the battery case), six WB37 packs total, eighteen TB30 flight batteries (nine full rotations), and full accessory support. That's enough to run a multi-pilot M30 program across a multi-day operation without compromise.\u003c\/p\u003e\n\n\u003ch2\u003eAir travel and lithium-battery shipping\u003c\/h2\u003e\n\u003cp\u003eThe case ships with the same MIL-spec construction as other GPC products. Lithium-battery air travel rules apply to the batteries themselves:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTB30 (M30 \/ M30T flight battery) is 131.6 Wh per pack — above the FAA \/ IATA 100 Wh standard carry-on threshold but below the 160 Wh limit that allows airline-approved passenger carry-on with prior authorization. Each airline handles 100-160 Wh batteries differently; obtain written approval before traveling.\u003c\/li\u003e\n  \u003cli\u003eWB37 (RC Plus controller battery) is 37.39 Wh per pack and travels under standard rules (sub-100 Wh batteries are normal carry-on items, up to ~20 spares per passenger).\u003c\/li\u003e\n  \u003cli\u003eSpare lithium batteries of any capacity are not permitted in checked baggage. If you check the case, remove all batteries first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor programs traveling by air with twelve TB30 batteries, plan ahead: contact your airline for approval, and recognize that twelve packs may exceed individual passenger limits — multi-passenger or freight shipment may be required.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow many batteries does it carry, exactly?\u003c\/summary\u003e\n  \u003cp\u003eTwelve DJI TB30 flight batteries (the Matrice 30 \/ M30T uses two per flight, so twelve packs is six rotations) plus four DJI WB37 controller batteries (the external batteries for the DJI RC Plus, which extend controller runtime from ~3.8 to ~6 hours per swap). The case also holds one DJI RC Plus remote controller in a dedicated cavity.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow is this different from the GPC M30 8 Battery Case?\u003c\/summary\u003e\n  \u003cp\u003eThe 8 Battery Case carries eight TB30 batteries (four flight rotations) plus three WB37 batteries in a smaller, lighter case. This 12 Battery Case carries twelve TB30 batteries (six rotations), four WB37 batteries, and a dedicated RC Plus controller cavity in a larger wheeled shell. Pick the 8 Battery Case if you run shorter missions; pick the 12 Battery Case if you run full-day operations and want a controller cavity included.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow heavy is the case when fully loaded?\u003c\/summary\u003e\n  \u003cp\u003eEmpty weight is 13 pounds. Loaded with twelve TB30 batteries (~685 g \/ 1.5 lb each, ~18 lb total), four WB37 batteries (~155 g each, ~1.4 lb total), and an RC Plus controller (~2.5 lb), total weight is approximately 35-40 pounds. The inline skate wheels and pull handle are designed for that load — wheel the case rather than carrying it.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I check this on an airline?\u003c\/summary\u003e\n  \u003cp\u003eThe case shell is rated for the impact and environmental stresses of airline checked baggage. Lithium batteries are a separate matter: TB30 (131.6 Wh) packs require airline approval and must travel in carry-on, not checked baggage; WB37 (37.39 Wh) packs travel as standard carry-on. With twelve TB30 packs, you may exceed individual passenger limits for \u0026gt;100 Wh batteries — verify with your airline well in advance, and consider freight shipment if the program is traveling with the full case.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes this work for the Matrice 4D or Matrice 4 Series?\u003c\/summary\u003e\n  \u003cp\u003eNo. The Matrice 4 Series and Matrice 4D Series use different batteries (the M4D Series Intelligent Flight Battery, 6,768 mAh @ 22.14 V) than the M30 Series TB30 (5,880 mAh @ 26.1 V). The case foam is precision-cut for TB30 dimensions and won't fit other DJI battery models. For M4-series battery transport, look at GPC's M4-specific cases.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs the case lockable?\u003c\/summary\u003e\n  \u003cp\u003eYes. The padlock holes are reinforced with stainless steel padlock protector clips. The case accepts standard padlocks (sold separately). For programs that need TSA-compliant locks or specific security ratings, verify the padlock specifications against your organization's policy.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat if I need to carry more than 12 batteries?\u003c\/summary\u003e\n  \u003cp\u003eFor programs running larger M30 \/ M30T fleets, GPC sells the case in 8-battery, 10-battery, and 12-battery configurations. Multiple cases can travel together to support multi-aircraft, multi-pilot operations. The 12-battery version is the largest single-case capacity GPC offers for the M30 Series. Contact us for help sizing your fleet transport solution.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhere is it made?\u003c\/summary\u003e\n  \u003cp\u003eDesigned and built in Poway, California by Go Professional Cases — the same manufacturer that supplies hard cases for DJI's enterprise drone lineup used by public-safety, surveying, federal, and commercial operators. The shells are SKB military-spec, and the foam is water-jet cut in-house in the United States.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat's the warranty?\u003c\/summary\u003e\n  \u003cp\u003eThe GPC case ships with a lifetime replacement guarantee from Go Professional Cases against manufacturing defects in the shell, hinge, latch hardware, and wheels. The foam insert is consumable; replacement foam is available as a separate SKU if needed. Standard exclusions apply for damage from extreme misuse or unauthorized modification.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48299936743741,"sku":"","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/DJIMATRICE30TWELVEBATTERYWHEELEDCASE.jpg?v=1713904302"},{"product_id":"gpc-d-rtk-2-ground-station-bag","title":"GPC D-RTK 2 Ground Station Bag","description":"\u003cp\u003eThe GPC D-RTK 2 Ground Station Bag is a soft-shell carrying bag built specifically to hold the DJI D-RTK 2 High-Precision GNSS Mobile Station and its accessories. Constructed from rugged 800-denier fabric with a customized closed-cell foam insert and a 2-inch lid liner that stiffens the bag for stacking, this is the right transport solution for operators who need protection for the ground station unit without the weight and bulk of a full hard case. Made in the USA by Go Professional Cases. Designed to travel as the companion piece to the GPC D-RTK 2 Tripod Bag (sold separately) for a complete two-bag base-station kit.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eUSA-made soft carrying bag for the DJI D-RTK 2 High-Precision GNSS Mobile Station. 800-denier fabric, custom foam insert, 2-inch lid liner. The lighter alternative to a hard case for the base-station unit.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-tooled closed-cell foam insert designed specifically for the DJI D-RTK 2 Mobile Station body and its accessories\u003c\/li\u003e\n  \u003cli\u003e2-inch thick foam lining the lid for impact protection and rigidity — the lid stays firm enough to stack other gear on top of the bag\u003c\/li\u003e\n  \u003cli\u003e800-denier fabric exterior, the same fabric weight used on field-rated tool and equipment bags, with abrasion resistance for vehicle and ground transport\u003c\/li\u003e\n  \u003cli\u003eFull-perimeter zipper closure for easy access to the ground station and accessories during setup and teardown\u003c\/li\u003e\n  \u003cli\u003eCustom GPC tooling sized for the actual D-RTK 2 unit dimensions rather than a generic interior layout\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatibility with the GPC D-RTK 2 Tripod Bag (sold separately) — together, the two bags carry the entire base-station kit in two lightweight transport units instead of one oversized hard case\u003c\/li\u003e\n  \u003cli\u003eSignificantly lighter than a hard case for the same protection level, making it the practical choice for crews who set up the base station daily across multiple sites\u003c\/li\u003e\n  \u003cli\u003eMade in the USA by Go Professional Cases, the same manufacturer that supplies hard cases and bags for DJI's enterprise drone lineup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat it carries\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × DJI D-RTK 2 High-Precision GNSS Mobile Station body\u003c\/li\u003e\n  \u003cli\u003eD-RTK 2 accessories (batteries, cables, mounting hardware as packed in the original DJI kit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eGo Professional Cases (GPC), Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA (Poway, California)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible equipment\u003c\/td\u003e\n\u003ctd\u003eDJI D-RTK 2 High-Precision GNSS Mobile Station\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eSoft-shell carrying bag\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eExterior fabric\u003c\/td\u003e\n\u003ctd\u003e800-denier\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterior foam\u003c\/td\u003e\n\u003ctd\u003eClosed-cell, water-jet precision-cut for the D-RTK 2 unit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLid liner\u003c\/td\u003e\n\u003ctd\u003e2-inch closed-cell foam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eZipper\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompanion product\u003c\/td\u003e\n\u003ctd\u003eGPC D-RTK 2 Tripod Bag (sold separately) for the tripod and ground station pole\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOperators running the DJI D-RTK 2 Mobile Station as the RTK base for Matrice 300 RTK, Matrice 350 RTK, Phantom 4 RTK, or Matrice 210 RTK V2 missions, where the base station moves with the crew daily\u003c\/li\u003e\n  \u003cli\u003eSurveying, mapping, and inspection contractors who set up the D-RTK 2 in different locations each shift and need a practical transport solution between the truck and the deployment point\u003c\/li\u003e\n  \u003cli\u003eCrews already running the GPC D-RTK 2 Tripod Bag who want a matched companion bag for the ground station unit — the two-bag kit handles the complete D-RTK 2 setup\u003c\/li\u003e\n  \u003cli\u003ePublic-safety and emergency-response programs running D-RTK 2 for high-accuracy mapping work in the field, where a lightweight soft bag beats wrestling a hard case in and out of vehicles\u003c\/li\u003e\n  \u003cli\u003eOperators who want USA-made gear backed by a reputable manufacturer rather than a generic third-party bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × GPC D-RTK 2 Ground Station Bag (soft-shell carrying bag with custom foam insert)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The DJI D-RTK 2 Mobile Station itself, batteries, tripod, ground station pole, and any other accessories are sold separately. This bag is the transport solution for the ground station unit only. The tripod and pole are carried in the separately sold GPC D-RTK 2 Tripod Bag.\u003c\/p\u003e\n\n\u003ch2\u003ePairing with the GPC D-RTK 2 Tripod Bag\u003c\/h2\u003e\n\u003cp\u003eThe complete D-RTK 2 transport kit is two bags:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThis bag (Ground Station Bag):\u003c\/strong\u003e Holds the D-RTK 2 mobile station unit and its accessories.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGPC D-RTK 2 Tripod Bag (sold separately):\u003c\/strong\u003e Holds the D-RTK 2 tripod and ground station pole in a long carrier sized for the assembled tripod kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTogether, the two bags travel as a complete base-station kit — lighter, more compact, and faster to set up than a single oversized hard case. Most operators carry both bags together; some crews leave the tripod set up on a vehicle mount and use just this Ground Station Bag for the base unit.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhich DJI products use the D-RTK 2?\u003c\/summary\u003e\n  \u003cp\u003eThe DJI D-RTK 2 High-Precision GNSS Mobile Station provides RTK corrections to several DJI aircraft, including the Matrice 300 RTK, Matrice 350 RTK, Phantom 4 RTK, Matrice 210 RTK V2, and DJI Agras agricultural drones. This bag is sized for the D-RTK 2 unit regardless of which aircraft it pairs with. If you're using the newer DJI D-RTK 3 Multifunctional Station, this is not the correct bag — the D-RTK 3 is a different unit with different dimensions.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs this a hard case or a soft bag?\u003c\/summary\u003e\n  \u003cp\u003eSoft bag. The exterior is 800-denier fabric (rugged but flexible), and the interior is custom foam tooled for the D-RTK 2. The 2-inch foam in the lid adds rigidity so the bag stacks well in a vehicle. For maximum protection against impact and water in extreme conditions, a hard case is the stronger choice; the soft bag is the right balance for daily field use where weight and bulk matter.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes it include the D-RTK 2 base station?\u003c\/summary\u003e\n  \u003cp\u003eNo. The bag holds the D-RTK 2 base station — the station itself is sold separately by DJI. This bag is the transport solution for operators who already own (or are buying) the D-RTK 2 and need a practical way to move it between sites.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill it fit the tripod?\u003c\/summary\u003e\n  \u003cp\u003eNo. This bag is sized for the D-RTK 2 ground station unit only. The tripod and ground station pole are carried in the separately sold GPC D-RTK 2 Tripod Bag (approximately 48 × 7 × 7 in, designed for the long tripod \/ pole assembly). Most operators carry both bags together for a complete D-RTK 2 transport kit.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I check this on an airline?\u003c\/summary\u003e\n  \u003cp\u003eThe D-RTK 2 contains an intelligent battery rated around 15.4 Wh — well under the FAA \/ IATA 100 Wh threshold for spare lithium batteries in carry-on, so the unit can travel commercial without battery restrictions. The bag itself is small enough to qualify as carry-on or checked baggage on most airlines depending on size limits. Verify with your specific airline before traveling, particularly if you're traveling with the unit installed in the bag.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow is this different from the GPC D-RTK 2 Tripod Bag?\u003c\/summary\u003e\n  \u003cp\u003eTwo different products for two different parts of the kit. The Tripod Bag is a long bag (about 48 inches) sized for the tripod and ground station pole. This Ground Station Bag is sized for the base-station unit itself. Together they form the complete D-RTK 2 transport kit — most operators buy both. Sold separately to keep the cost flexible for customers who only need one piece.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhere is it made?\u003c\/summary\u003e\n  \u003cp\u003eDesigned and built in Poway, California by Go Professional Cases — the same manufacturer that supplies hard cases and bags for DJI's enterprise drone lineup used by public-safety, surveying, federal, and commercial operators.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat's the warranty?\u003c\/summary\u003e\n  \u003cp\u003eThe bag ships with GPC's standard warranty against manufacturing defects in fabric, foam, zipper, and stitching. The foam insert is consumable; replacement foam is available if needed. Standard exclusions apply for damage from extreme misuse or unauthorized modification. Contact us for service or warranty questions.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48300112150845,"sku":"","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCRTKGSKSoftbagopen.jpg?v=1712591604"},{"product_id":"gpc-dji-mini-2-prop-cage-case","title":"GPC DJI Mini 2 Prop Cage Case","description":"\u003cspan data-mce-fragment=\"1\"\u003eThere is significant interest in the Enterprise UAV drone market for the Mavic Mini with Propeller Guards for use in indoor and close-quarters environments. We designed this case for Enterprise and Public Safety professionals who want to transport their Mini with propeller guards attached and need to hold more gear than the basic Fly More Combo items. We evaluated the market demands and designed for a total of 10 batteries including one in the Mini and 3 in the hub. We enabled it to fit either DJI propeller guards or the PGYTECH propeller cage\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e. You also have five cavities for other accessories that can be held in by the guards or baggies for the small items. This case accommodates the most popular tablet holders. Finally, we designed this super-compact case with our signature lower tray allowing for storage of either the iPad Air, iPad, or cell.\u003c\/span\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48300341428541,"sku":"","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIMINI2propCageCase.jpg?v=1712592599"},{"product_id":"gpc-dji-m300-hard-case","title":"GPC DJI M300 Hard Case","description":"\u003cp\u003eThe GPC DJI M300 Hard Case (V1) is the original full-kit rolling case for the DJI Matrice 300 RTK, built by Go Professional Cases to carry four flights worth of batteries, two controllers, the standard Zenmuse payload tray, spare props, and accessories in a single MIL-spec wheeled case. Water-jet precision-cut closed-cell foam is sized for eight TB60 flight batteries and a removable payload tray with cutouts for the Zenmuse H20 or H20T, Z15 spotlight, Zenmuse Z30, and FLIR XT2. The SKB military-spec shell, inline skate wheels, padlockable hardware, and lifetime replacement guarantee are all standard. Made in the USA.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eUSA-made MIL-spec rolling case for the DJI Matrice 300 RTK. Eight TB60 batteries, two controllers, removable payload tray for H20\/H20T\/Z15\/Z30\/XT2, spare props, and accessories in a single SKB-spec shell.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFull M300 RTK mission kit in one rolling case: aircraft, eight TB60 flight batteries (four full rotations), two controllers, two controller batteries, payload tray, spare props, and accessory cavities\u003c\/li\u003e\n  \u003cli\u003eRemovable payload tray with water-jet precision-cut cavities for the DJI Zenmuse H20, H20T, Z15 spotlight, Zenmuse Z30, and FLIR XT2 — pluck the perforated foam for the payloads you don't carry to free up cavities for other accessories or a single larger one\u003c\/li\u003e\n  \u003cli\u003eSKB military-spec hard-shell case, made in the USA, with water-jet precision-cut closed-cell foam tooled for the M300 RTK platform\u003c\/li\u003e\n  \u003cli\u003eIndustrial-strength pull handle and inline skate-style wheels — sized for a 28-pound empty case that loads to 70+ pounds with a full battery and payload complement\u003c\/li\u003e\n  \u003cli\u003ePadlock-ready: padlock holes are reinforced with stainless steel padlock protector clips for secure transport in vehicles, hotels, and shared facilities\u003c\/li\u003e\n  \u003cli\u003eWatertight and dust tight construction (MIL-C-4150J), resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F), and rated for impact protection (MIL-STD-810F)\u003c\/li\u003e\n  \u003cli\u003eAmbient pressure equalization valve (MIL-STD-648C) automatically equalizes air pressure during elevation changes\u003c\/li\u003e\n  \u003cli\u003eMolded-in hinge and trigger-release latches engineered for daily open-close cycles\u003c\/li\u003e\n  \u003cli\u003eTwo accessory cavities under the payload tray (next to the lower batteries, adjacent to the spare props) for cables, USB chargers, and small accessories\u003c\/li\u003e\n  \u003cli\u003eSnap-down rubber over-molded cushion grip handle for short carries and lifting in and out of vehicles\u003c\/li\u003e\n  \u003cli\u003eLifetime replacement guarantee from Go Professional Cases on the case shell and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat it carries\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × DJI Matrice 300 RTK aircraft\u003c\/li\u003e\n  \u003cli\u003e8 × DJI TB60 Intelligent Flight Batteries (four flight rotations)\u003c\/li\u003e\n  \u003cli\u003e2 × Remote controllers (originally configured for the Smart Controller Enterprise)\u003c\/li\u003e\n  \u003cli\u003e2 × Controller batteries (WB37)\u003c\/li\u003e\n  \u003cli\u003eSpare propellers\u003c\/li\u003e\n  \u003cli\u003eRemovable payload tray for one of the following: DJI Zenmuse H20 or H20T, Z15 spotlight, Zenmuse Z30, FLIR XT2 (or remove the perforated foam to combine cavities)\u003c\/li\u003e\n  \u003cli\u003e2 × Cavities for GPC LensPen MicroPro (sold separately)\u003c\/li\u003e\n  \u003cli\u003e2 × Cavities for GPC Micro SD Card Holder (sold separately)\u003c\/li\u003e\n  \u003cli\u003e2 × Accessory cavities under the payload tray\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eGo Professional Cases (GPC), Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eGPC-DJI-M300\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e850005270362\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA (Poway, California)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible aircraft\u003c\/td\u003e\n\u003ctd\u003eDJI Matrice 300 RTK\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShell\u003c\/td\u003e\n\u003ctd\u003eSKB military-spec hard case\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoam\u003c\/td\u003e\n\u003ctd\u003eWater-jet precision-cut, closed-cell, tooled for the M300 RTK kit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eExterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e26.50 × 26.54 × 15.65 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e24.00 × 24.00 × 14.00 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (empty)\u003c\/td\u003e\n\u003ctd\u003e28 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWheels\u003c\/td\u003e\n\u003ctd\u003eInline skate-style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePull handle\u003c\/td\u003e\n\u003ctd\u003eIndustrial-strength\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWatertight rating\u003c\/td\u003e\n\u003ctd\u003eMIL-C-4150J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-810F (UV, solvents, corrosion, fungus, impact)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePressure equalization\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-648C valve, automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHinge \/ latch system\u003c\/td\u003e\n\u003ctd\u003eMolded-in hinge, trigger-release latches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePadlock holes with stainless steel protector clips (padlocks sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSide handle\u003c\/td\u003e\n\u003ctd\u003eSnap-down rubber over-molded cushion grip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime replacement guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eV1 vs. V2: which one is right for me?\u003c\/h2\u003e\n\u003cp\u003eGPC sells two versions of the M300 hard case. The V1 (this product) is the original case, designed around the M300 RTK kit as it shipped with the Smart Controller Enterprise and the first-generation Zenmuse payload lineup (H20, H20T, Z15, Z30, XT2). The V2 is the updated case, redesigned for the current M300 RTK \/ M350 RTK kit with the DJI RC Plus controller and newer payloads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChoose the V1\u003c\/strong\u003e if you're flying an M300 RTK with the Smart Controller Enterprise and using the older Zenmuse payload lineup (H20 \/ H20T \/ Z15 \/ Z30 \/ XT2). The V1 foam is tooled for that exact configuration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChoose the V2\u003c\/strong\u003e if you've upgraded to the DJI RC Plus controller, or if you're flying a Matrice 350 RTK, or if you're using newer payloads (H30, H30T, L2, P1, etc.). The V2 foam is updated for the newer hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're not sure which controller or payload generation you have, check the model labels on your hardware or in DJI Pilot 2 before ordering. The V2 listing is the better choice for new M350 RTK kits and modern M300 setups; the V1 is the right call for legacy M300 RTK configurations and operators with the older Smart Controller Enterprise.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatrice 300 RTK operators flying the original kit (Smart Controller Enterprise + first-generation Zenmuse payloads) who want the case tooled specifically for that configuration\u003c\/li\u003e\n  \u003cli\u003eFleet operators with existing M300 RTK programs running H20 \/ H20T \/ Z30 \/ XT2 payloads who need a transport case sized for the full mission kit\u003c\/li\u003e\n  \u003cli\u003ePublic-safety, fire-service, inspection, and utility programs that have been running the M300 RTK on its original Zenmuse payloads since 2020 and want a matching transport solution\u003c\/li\u003e\n  \u003cli\u003eOperators replacing an older third-party case with a MIL-spec USA-made alternative backed by a lifetime replacement guarantee\u003c\/li\u003e\n  \u003cli\u003eCrews who need wheels for the loaded case — at 28 lbs empty and 70+ lbs loaded, this case is not a practical hand-carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × GPC DJI M300 Hard Case V1 (hard shell + custom M300 RTK foam insert with removable payload tray)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The aircraft, controllers, batteries, propellers, charger, payloads, and other accessories are sold separately. The GPC LensPen MicroPro and GPC Micro SD Card Holder are also sold separately — the case has cavities pre-cut for them, but the accessories themselves are not included. Padlocks for the case's lockable holes are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat's the difference between the V1 and V2 cases?\u003c\/summary\u003e\n  \u003cp\u003eThe V1 (this product) is the original GPC M300 case, designed for the Matrice 300 RTK as it shipped with the Smart Controller Enterprise and the original Zenmuse payload lineup (H20, H20T, Z15, Z30, XT2). The V2 is the updated version, designed for the current M300 RTK \/ M350 RTK configuration with the DJI RC Plus controller and newer payloads (H30, H30T, L2, P1). Same MIL-spec construction in both versions; the difference is the foam tooling. If you're flying with the Smart Controller Enterprise and original Zenmuse payloads, pick the V1; if you've upgraded to RC Plus or are on the M350, pick the V2.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow heavy is the case when fully loaded?\u003c\/summary\u003e\n  \u003cp\u003eEmpty weight is 28 pounds. Loaded with the M300 RTK aircraft (~6.3 kg \/ 14 lb), eight TB60 batteries (~1.35 kg \/ 3 lb each, ~24 lb total), two controllers, two WB37 batteries, payloads, and accessories, total weight is approximately 70-80 pounds. The inline skate wheels and pull handle are designed for that load — wheel the case rather than carrying it. The cushion grip side handle is for short lifts in and out of vehicles.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I check this on an airline?\u003c\/summary\u003e\n  \u003cp\u003eThe case shell is rated for the impact and environmental stresses of airline checked baggage, but the exterior dimensions (26.5 × 26.5 × 15.7 in) plus the loaded weight exceed standard checked baggage limits on most commercial airlines. Expect oversized\/overweight surcharges and verify with your specific airline before traveling. Lithium-battery restrictions also apply: TB60 batteries are ~274 Wh each, far above the FAA \/ IATA 100 Wh threshold, and cannot fly as carry-on or checked baggage on a commercial passenger flight. TB60 batteries require Class 9 hazardous materials shipment by a licensed freight carrier.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes the payload tray fit the H30 or H30T?\u003c\/summary\u003e\n  \u003cp\u003eThe V1 payload tray is tooled for the H20, H20T, Z15 spotlight, Z30, and XT2. The newer H30 and H30T payloads have different dimensions and may not seat correctly in the V1 tray. For H30-series payloads or other newer Zenmuse products, the V2 case is the better choice. If you're flying H20-series payloads on an M300 RTK, the V1 is correct.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat if I have an M350 RTK?\u003c\/summary\u003e\n  \u003cp\u003eThe Matrice 350 RTK has a similar airframe to the M300 RTK and may fit the V1 case mechanically, but the V1 was specifically tooled for the M300 RTK with Smart Controller Enterprise. Most M350 RTK operators run the RC Plus controller, which doesn't match the V1 controller cavity. The V2 case is the right choice for M350 RTK kits. If you're running an M350 RTK with the legacy Smart Controller Enterprise (rare), contact us to confirm fit before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs the case lockable?\u003c\/summary\u003e\n  \u003cp\u003eYes. The padlock holes are reinforced with stainless steel padlock protector clips. The case accepts standard padlocks (sold separately). For programs that need TSA-compliant locks or specific security ratings, verify the padlock specifications against your organization's policy.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I customize the foam?\u003c\/summary\u003e\n  \u003cp\u003eThe V1 foam is tooled for the standard M300 RTK kit, including the removable payload tray with perforated cavities for individual Zenmuse payloads. If you don't carry one of the supported payloads, you can pluck the perforated foam to convert the cavity to general storage. For fully custom foam cuts, GPC offers custom foam services as a separate order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhere is it made?\u003c\/summary\u003e\n  \u003cp\u003eDesigned and built in Poway, California by Go Professional Cases — the same manufacturer that supplies hard cases for DJI's enterprise drone lineup used by public-safety, surveying, federal, and commercial operators. The shells are SKB military-spec, and the foam is water-jet cut in-house in the United States.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat's the warranty?\u003c\/summary\u003e\n  \u003cp\u003eThe GPC case ships with a lifetime replacement guarantee from Go Professional Cases against manufacturing defects in the shell, hinge, latch hardware, and wheels. The foam insert is consumable; replacement foam is available as a separate SKU if needed. Standard exclusions apply for damage from extreme misuse or unauthorized modification.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48300472041789,"sku":"","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIM300Hardcaseempty.jpg?v=1712593648"},{"product_id":"gpc-dji-m210-xts","title":"GPC DJI M210-XTS","description":"\u003cspan data-mce-fragment=\"1\"\u003eWe worked with DJI and a team of experienced enterprise users to ensure our new DJI Matrice M210 XTS case (accommodates DJI Matrice 200, 210 (V1 and V2) or 210 RTK (V1 and V2)) meets the most rigorous requirements in the field. Our new configuration holds more accessories and sensors than any of our previous designs to support the full spectrum of mission types. The big upgrade with this new design is added cavities for theFLIR XT2, SlantRange 3PX, Sentera AGX710, and Cendence with Patch Antenna. The DJI-M210-XTS is the most compact configuration possible, accommodating 6 camera\/sensor options, up to 14 TB50s or 8 TB55s and 3 options for monitor storage. As always, GPC uses the best quality cases by SKB and our signature water jet low abrasive soft cell polyethylene foam with the blue MDL cap for added durability.\u003c\/span\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48300541935933,"sku":"","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIMatrice210XTSCaseclosed.jpg?v=1712594214"},{"product_id":"gpc-dji-m30-8-battery-case","title":"GPC DJI Matrice 30 Battery Case (8 Batteries)","description":"\u003cp\u003eThe \u003cstrong\u003eGPC DJI Matrice 30 Battery Case (8 Batteries)\u003c\/strong\u003e is the ultimate storage and transport solution for professionals who rely on maximum uptime in the field. Engineered with precision-cut foam and a rugged exterior, this case securely houses up to \u003cstrong\u003eeight TB30 batteries\u003c\/strong\u003e—ensuring your drone team can stay mission-ready no matter where operations take place.\u003c\/p\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eBattery Capacity\u003c\/th\u003e \u003ctd\u003eHolds up to 8 × DJI TB30 batteries\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eCase Material\u003c\/th\u003e \u003ctd\u003eMilitary-grade hard shell with custom foam insert\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eWater \u0026amp; Dust Rating\u003c\/th\u003e \u003ctd\u003eWeather-resistant design for field operations\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eFoam Type\u003c\/th\u003e \u003ctd\u003ePrecision water-jet cut, closed-cell polyethylene foam\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e \u003ctd\u003eApprox. 8–10 lbs (varies by revision)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e \u003ctd\u003eDesigned to meet airline carry-on guidelines (varies by case series)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eVersatile Applications\u003c\/h2\u003e \u003cp\u003eThe \u003cstrong\u003eGPC DJI Matrice 30 Battery Case\u003c\/strong\u003e is ideal for public safety departments, enterprise drone teams, inspectors, and field operators who need organized, reliable, and mission-ready power management. Its compact layout keeps batteries protected during transport, staged for storage, and ready for rapid deployment in demanding environments.\u003c\/p\u003e \u003ch3\u003eWhat's Included\u003c\/h3\u003e \u003cp\u003e(1) GPC DJI Matrice 30 Battery Case\u003cbr\u003e (1) Custom-Cut Closed-Cell Foam Insert for 8 Batteries\u003c\/p\u003e \u003cp\u003e\u003cem\u003eDisclaimer: Batteries shown in images are not included with this purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48300595970365,"sku":"","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIM308BatteryCase.jpg?v=1712594579"},{"product_id":"gpc-dji-mini-4-pro-case","title":"GPC DJI Mini 4 Pro Case","description":"\u003cspan data-mce-fragment=\"1\"\u003eA place for your entire DJI Mini 4 Pro and Fly More Combo. We have designed this case to accommodate the Mini 4 Pro with the RC-N2 or RC 2 controller, up to 5 batteries, \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eand Misc. items cavity.\u003c\/span\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48317522247997,"sku":"","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIMini4procase.jpg?v=1712681571"},{"product_id":"gpc-dji-mavic-mini-case","title":"GPC DJI Mavic Mini Case","description":"\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"feat-name\"\u003eThe case can store the controller, 4 batteries, charging hub, a smart phone, and misc. cables. The case is watertight, and measures 10in x 11in x 5in\u003c\/span\u003e\u003c\/p\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48317768696125,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIMavicMinicase.jpg?v=1712682153"},{"product_id":"gpc-dji-mavic-2-enterprise-replacement-foam-set-for-smart-controller","title":"GPC DJI Mavic 2 Enterprise Replacement Foam Set For Smart Controller","description":"\u003cspan style=\"font-size: 0.875rem;\"\u003eStores the drone, smart controller, 4 batteries, charger adapter, Mavic 2 charging hub, M2E spotlight, M2E beacon, M2E speaker, cables, spare propellers, and an SD card holder. This product does not include a hard case, or case of any kind. \u003c\/span\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48317969072445,"sku":"","price":29.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIMavic2Enterprisesmartcontrollerfoam.jpg?v=1712682696"},{"product_id":"gpc-dji-mavic-2-enterprise-foam-set","title":"GPC DJI Mavic 2 Enterprise Foam Set","description":"\u003cspan data-mce-fragment=\"1\"\u003eThis is an alternative foam set for the original Mavic 2 Enterprise or Enterprise Dual Case. GPC utilizes their water-jet precision cut closed cell foam to resist water and dust infiltration, and this replacement has a much more efficient design so you can carry more, and know that it's still secure.\u003c\/span\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48318248026429,"sku":"","price":59.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIMavic2Enterprisefoamset.jpg?v=1712683537"},{"product_id":"gpc-dji-phantom-4-pro-props-case-v2","title":"GPC DJI Phantom 4 Pro Props Case V2","description":"Fits Phantom 4 pro with propellers installed. Stores the drone, controller, 6 batteries, tablet, charger, propellers, and more. Compatible with Phantom 4 Pro Series.","brand":"GPC","offers":[{"title":"Default Title","offer_id":48318481498429,"sku":"","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIPhantom4proV2case.jpg?v=1712684369"},{"product_id":"gpc-dji-mini-2-case","title":"GPC DJI Mini 2 Case","description":"\u003cp\u003eThe GPC DJI Mini 2 Case is a hard-shell, watertight, MIL-spec carrying case for the DJI Mini 2, built by Go Professional Cases in Poway, California. Water-jet precision-cut closed-cell foam holds the aircraft (with props folded and the prop holder attached), three flight batteries plus the one installed in the Mini 2, the Mini 2 remote controller with sticks attached, two sets of spare propellers and a screwdriver, the original USB charger and cable, and three additional cavities for cables, USB chargers, and other small accessories. Built around an SKB military-spec shell with a molded hinge, trigger release latches, and a pressure equalization valve, the case is rated against the same impact, environmental, and ingress standards used by U.S. military and industrial customers. It floats, too.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eUSA-made watertight hard case for the DJI Mini 2. Fits the aircraft, controller, four batteries total, two spare prop sets, charger, cables, and accessories. MIL-spec construction with a lifetime replacement guarantee.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSKB military-spec hard-shell case, made in the USA, with water-jet precision-cut closed-cell foam tooled specifically for the DJI Mini 2 airframe and accessories\u003c\/li\u003e\n  \u003cli\u003eWatertight and dust tight construction (MIL-C-4150J), resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F), and rated for impact protection (MIL-STD-810F) — the same standards used by military and industrial leaders\u003c\/li\u003e\n  \u003cli\u003eFloats on water, so the case can travel with you on a boat, kayak, or raft without risking the aircraft if it gets dropped overboard\u003c\/li\u003e\n  \u003cli\u003eMolded-in hinge and trigger-release latch system for repeated daily opening without the wear of bolt-on hardware\u003c\/li\u003e\n  \u003cli\u003eAmbient pressure equalization valve (MIL-STD-648C) automatically equalizes air pressure inside the case when traveling by air or crossing elevation changes\u003c\/li\u003e\n  \u003cli\u003eSnap-down rubber over-molded cushion grip handle for comfortable single-hand carry\u003c\/li\u003e\n  \u003cli\u003eFoam cavity layout supports both the stock entry-level Mini 2 configuration and converts to the Fly More Combo kit with three additional batteries — buy once, expand later\u003c\/li\u003e\n  \u003cli\u003eThree additional accessory cavities sized for miscellaneous cables, USB charge plugs, and small accessories the operator picks up over time\u003c\/li\u003e\n  \u003cli\u003eLifetime replacement guarantee from Go Professional Cases — same case maker that supplies cases for DJI's enterprise drones used by public safety, surveying, and federal agencies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat it carries\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × DJI Mini 2 aircraft (with propellers folded and propeller holder attached)\u003c\/li\u003e\n  \u003cli\u003e3 × Mini 2 Intelligent Flight Batteries, plus the battery installed in the aircraft (4 total) — or convert the same cavity to fit the Mini 2 charging hub with three batteries loaded\u003c\/li\u003e\n  \u003cli\u003e2 × Sets of spare propellers with screwdriver\u003c\/li\u003e\n  \u003cli\u003e1 × DJI Mini 2 remote controller (with sticks attached)\u003c\/li\u003e\n  \u003cli\u003e1 × Original USB charger and cable\u003c\/li\u003e\n  \u003cli\u003e1 × Slot for the optional GPC LensPen MicroPro (sold separately)\u003c\/li\u003e\n  \u003cli\u003e1 × Slot for the optional GPC Micro SD Card Holder (sold separately)\u003c\/li\u003e\n  \u003cli\u003e3 × Accessory cavities for cables, USB plugs, and other small items\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eGo Professional Cases (GPC), Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eGPC-DJI-Mini2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA (Poway, California)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShell\u003c\/td\u003e\n\u003ctd\u003eSKB military-spec hard case\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoam\u003c\/td\u003e\n\u003ctd\u003eWater-jet precision-cut, closed-cell, custom tooled for the DJI Mini 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eExterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e10.73 × 9.69 × 4.80 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterior dimensions (L × W × D)\u003c\/td\u003e\n\u003ctd\u003e9.50 × 7.38 × 4.13 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (empty)\u003c\/td\u003e\n\u003ctd\u003e2 lb 6 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e3 lb 0 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWatertight rating\u003c\/td\u003e\n\u003ctd\u003eMIL-C-4150J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-810F (UV, solvents, corrosion, fungus, impact)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePressure equalization\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-648C valve, automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHinge \/ latch system\u003c\/td\u003e\n\u003ctd\u003eMolded-in hinge, trigger-release latches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHandle\u003c\/td\u003e\n\u003ctd\u003eSnap-down rubber over-molded cushion grip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWater performance\u003c\/td\u003e\n\u003ctd\u003eFloats\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime replacement guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDJI Mini 2 pilots upgrading from the stock soft zippered case, which provides minimal protection and limited accessory storage\u003c\/li\u003e\n  \u003cli\u003eOperators who fly in adverse environments — boats, kayaks, beaches, dusty fields, wet conditions — where the watertight, floating shell adds real protection that a soft case can't\u003c\/li\u003e\n  \u003cli\u003eTravel pilots who check the aircraft as luggage or in a vehicle, where impact, pressure changes, and temperature swings can damage less-protected cases\u003c\/li\u003e\n  \u003cli\u003eFly More Combo owners who need to carry the full battery and accessory complement rather than the entry-level kit\u003c\/li\u003e\n  \u003cli\u003ePublic-safety and commercial operators using the Mini 2 as a secondary or sub-250 g aircraft alongside larger Matrice or Mavic Enterprise platforms, and standardizing on GPC cases for the entire fleet\u003c\/li\u003e\n  \u003cli\u003eAnyone who wants a USA-made hard case with a lifetime replacement guarantee from a manufacturer specifically supplying DJI's enterprise market\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × GPC DJI Mini 2 Case (hard shell + custom Mini 2 foam insert)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The aircraft, batteries, controller, propellers, charger, and other accessories are sold separately. The GPC LensPen MicroPro and GPC Micro SD Card Holder are also sold separately — the case has cavities pre-cut for them, but the accessories themselves are not included.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes it fit the DJI Mini 2 SE, Mini SE, or Mini 4K?\u003c\/summary\u003e\n  \u003cp\u003eThe case is precision-tooled specifically for the DJI Mini 2. GPC does not list other Mini variants as officially supported. The Mini SE, Mini 2 SE, and Mini 4K share a similar airframe shape with the Mini 2 and may fit, but exact fit and accessory cavity alignment may vary. For the Mini 3, Mini 3 Pro, Mini 4 Pro, and newer variants, GPC sells dedicated cases — those aircraft have different dimensions and should not be forced into this case.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes it really float?\u003c\/summary\u003e\n  \u003cp\u003eYes. The combination of the watertight SKB shell and the closed-cell foam interior gives the loaded case enough buoyancy to float, which means if it goes overboard from a boat, kayak, or dock, the case stays at the surface long enough to recover. The watertight seal also keeps water out, so the Mini 2 and accessories inside stay dry.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I check this on an airline?\u003c\/summary\u003e\n  \u003cp\u003eThe case itself is rated for the impact and environmental stresses of airline travel. Flight batteries are a separate matter and are governed by airline rules. The DJI Mini 2 Intelligent Flight Battery (typically around 17 Wh) sits well under the FAA \/ IATA 100 Wh threshold for spare lithium batteries in carry-on, so spare batteries can travel with you in the cabin. Spare lithium batteries are not permitted in checked baggage — keep the batteries in carry-on and check the case empty of batteries if you have to check it. Verify with your specific airline before traveling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill the foam wear out?\u003c\/summary\u003e\n  \u003cp\u003eThe closed-cell foam is designed for repeated drone-in \/ drone-out cycles and holds its shape over years of use. If you damage the foam or your aircraft configuration changes, GPC offers replacement foam inserts as separate SKUs. The case shell itself is covered by a lifetime replacement guarantee for manufacturing defects.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow does this compare to the stock DJI case?\u003c\/summary\u003e\n  \u003cp\u003eThe stock DJI Fly More Combo case is a soft zippered shoulder bag with foam inserts. It's lightweight and convenient for casual transport but offers minimal protection against impact, no watertight sealing, and no float capability. The GPC case is significantly heavier and bulkier, but it survives drops, environmental exposure, and rough transport that would damage gear stored in the stock case. Operators who fly in adverse conditions, travel often, or want to standardize on a long-term hard case typically pick GPC.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs there a version that fits the prop guard \/ cage?\u003c\/summary\u003e\n  \u003cp\u003eYes. GPC sells a separate \"DJI Mini 2 Prop Cage Case\" (GPC-DJI-MINI2-PG) that's larger and accommodates the Mini 2 with the optional prop cage \/ propeller guard installed. If you fly with the prop cage permanently mounted, that version is the better fit. The standard case sold here is for the Mini 2 with stock propellers folded and prop holder attached.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat's the warranty?\u003c\/summary\u003e\n  \u003cp\u003eThe GPC case ships with a lifetime replacement guarantee from Go Professional Cases against manufacturing defects in the shell, hinge, and latch hardware. The foam insert is consumable; replacement foam is available as a separate SKU if needed. Standard exclusions apply for damage from extreme misuse or unauthorized modification.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhere is it made?\u003c\/summary\u003e\n  \u003cp\u003eDesigned and built in Poway, California by Go Professional Cases — the same manufacturer that supplies hard cases for DJI's enterprise drone lineup used by public-safety, surveying, federal, and commercial operators. The shells are SKB military-spec, and the foam is water-jet cut in-house in the United States.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"GPC","offers":[{"title":"Default Title","offer_id":48318569316669,"sku":"","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIMini2case.jpg?v=1712684673"},{"product_id":"dji-avata-2-case","title":"GPC DJI Avata 2 Case","description":"\u003cp\u003eThe GPC DJI Avata 2 Case is a hard-shell, USA-made, MIL-spec carrying case built specifically for the full DJI Avata 2 Combo configuration. Water-jet precision-cut closed-cell foam holds the Avata 2 aircraft, DJI Goggles 3 (or Goggles Integra \/ Goggles 2), the Two-Way Charging Hub with three flight batteries plus the one installed in the aircraft, both the DJI RC 2 standard controller and the Motion Controller 3 (or Motion Controller 2), spare propellers, ND filters, and accessory cavities for cables and small items. The SKB military-spec shell with watertight seal, padlockable hardware, and a lifetime replacement guarantee keep an Avata 2 FPV kit organized and protected through years of operation.\u003c\/p\u003e\n\n\u003cblockquote\u003e\u003cp\u003eUSA-made hard case for the DJI Avata 2 Combo. Fits the aircraft, Goggles 3 \/ Integra \/ Goggles 2, charging hub with four batteries, both controllers, ND filters, and accessories in one MIL-spec shell.\u003c\/p\u003e\u003c\/blockquote\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFull DJI Avata 2 Combo in one case: aircraft, goggles, charging hub with four flight batteries, both controllers, spare props, ND filters, and accessory cavities\u003c\/li\u003e\n  \u003cli\u003eGoggles compatibility across the FPV lineup: DJI Goggles 3, DJI Goggles Integra, or DJI Goggles 2 all seat in the dedicated goggle cavity\u003c\/li\u003e\n  \u003cli\u003eDual-controller storage for both the DJI RC 2 standard controller and the DJI Motion Controller 3 (or Motion Controller 2), so the operator can pack whichever flight mode the mission needs\u003c\/li\u003e\n  \u003cli\u003eTwo-Way Charging Hub seats in the case with three flight batteries loaded, plus space for the fourth battery installed in the Avata 2 — a full session's worth of power travels in one compartment\u003c\/li\u003e\n  \u003cli\u003eSKB military-spec hard-shell case, made in the USA, with water-jet precision-cut closed-cell foam tooled specifically for the Avata 2 platform\u003c\/li\u003e\n  \u003cli\u003ePadlock-ready: padlock holes are reinforced with stainless steel padlock protector clips, so the case can be secured against tampering in vehicles, hotels, or shared studios\u003c\/li\u003e\n  \u003cli\u003eWatertight and dust tight construction (MIL-C-4150J), resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F), and rated for impact protection (MIL-STD-810F)\u003c\/li\u003e\n  \u003cli\u003eAmbient pressure equalization valve (MIL-STD-648C) automatically equalizes air pressure when traveling by air or crossing elevation changes\u003c\/li\u003e\n  \u003cli\u003eMolded-in hinge and trigger-release latches engineered for daily open-close cycles\u003c\/li\u003e\n  \u003cli\u003eSnap-down rubber over-molded cushion grip handle for comfortable single-hand carry\u003c\/li\u003e\n  \u003cli\u003eOptional accessory cavities for the GPC LensPen MicroPro and GPC Micro SD Card Holder (sold separately), plus two general-purpose accessory cavities\u003c\/li\u003e\n  \u003cli\u003eLifetime replacement guarantee from Go Professional Cases — the same case manufacturer that supplies hard cases for DJI's enterprise drone programs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat it carries\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × DJI Avata 2 aircraft\u003c\/li\u003e\n  \u003cli\u003e1 × DJI Goggles 3, Goggles Integra, or Goggles 2 (whichever is in your kit)\u003c\/li\u003e\n  \u003cli\u003e1 × DJI RC 2 standard controller\u003c\/li\u003e\n  \u003cli\u003e1 × DJI Motion Controller 3 (or Motion Controller 2)\u003c\/li\u003e\n  \u003cli\u003e1 × DJI Two-Way Charging Hub with 3 batteries loaded (plus 1 battery installed in the aircraft = 4 total flight batteries)\u003c\/li\u003e\n  \u003cli\u003eSpare propellers\u003c\/li\u003e\n  \u003cli\u003eND filters (operator's choice of set)\u003c\/li\u003e\n  \u003cli\u003e1 × Cavity for GPC LensPen MicroPro (sold separately)\u003c\/li\u003e\n  \u003cli\u003e1 × Cavity for GPC Micro SD Card Holder (sold separately)\u003c\/li\u003e\n  \u003cli\u003e2 × Accessory cavities for cables, USB-C chargers, and small items\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eGo Professional Cases (GPC), Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eGPC-DJI-AVATA2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA (Poway, California)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible aircraft\u003c\/td\u003e\n\u003ctd\u003eDJI Avata 2 (second-generation Avata, 2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible goggles\u003c\/td\u003e\n\u003ctd\u003eDJI Goggles 3, Goggles Integra, Goggles 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible controllers\u003c\/td\u003e\n\u003ctd\u003eDJI RC 2, Motion Controller 3, Motion Controller 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible charging hub\u003c\/td\u003e\n\u003ctd\u003eDJI Avata 2 Two-Way Charging Hub with up to 3 batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShell\u003c\/td\u003e\n\u003ctd\u003eSKB military-spec hard case\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoam\u003c\/td\u003e\n\u003ctd\u003eWater-jet precision-cut, closed-cell, custom tooled for the DJI Avata 2 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWatertight rating\u003c\/td\u003e\n\u003ctd\u003eMIL-C-4150J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-810F (UV, solvents, corrosion, fungus, impact)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePressure equalization\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-648C valve, automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHinge \/ latch system\u003c\/td\u003e\n\u003ctd\u003eMolded-in hinge, trigger-release latches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePadlock holes with stainless steel protector clips (padlocks sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHandle\u003c\/td\u003e\n\u003ctd\u003eSnap-down rubber over-molded cushion grip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime replacement guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDJI Avata 2 pilots upgrading from the stock soft cases that ship with the Fly More Combo, which give limited protection and don't organize the full goggles-plus-controllers configuration\u003c\/li\u003e\n  \u003cli\u003eFPV cinematographers carrying the complete Avata 2 kit between locations, where one watertight case with dedicated foam cavities is faster and safer than juggling separate bags\u003c\/li\u003e\n  \u003cli\u003ePublic-safety crews using the Avata 2 for indoor reconnaissance, hostage \/ barricade clearance, and tight-space inspection, where a hard case keeps the aircraft and goggles intact between deployments\u003c\/li\u003e\n  \u003cli\u003eTraining programs running the Avata 2 with mixed controller modes (standard RC 2 for camera-stable flight, Motion Controller for FPV training), where the case stores both controllers in matched cavities\u003c\/li\u003e\n  \u003cli\u003eTravel pilots carrying the Avata 2 kit by air or vehicle, where impact, pressure changes, and weather can damage gear in a softer case\u003c\/li\u003e\n  \u003cli\u003eAnyone who wants a USA-made hard case with a lifetime replacement guarantee from a manufacturer specifically supplying DJI's enterprise market\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × GPC DJI Avata 2 Case (hard shell + custom Avata 2 foam insert)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The aircraft, goggles, controllers, batteries, charging hub, ND filters, and other accessories are sold separately. The GPC LensPen MicroPro and GPC Micro SD Card Holder are also sold separately — the case has cavities pre-cut for them, but the accessories themselves are not included. Padlocks for the case's lockable holes are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes it fit the original DJI Avata (first generation, 2022)?\u003c\/summary\u003e\n  \u003cp\u003eNo. This case is tooled specifically for the DJI Avata 2 (second-generation Avata, released 2024). The original Avata has a different airframe shape and a different battery, and won't fit the Avata 2 foam cavities cleanly. For the original Avata, GPC sells a separate \"DJI Avata Case\" — that's the correct product for first-generation Avata kits.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhich goggles does it fit?\u003c\/summary\u003e\n  \u003cp\u003eThe case is designed to fit the DJI Goggles 3, DJI Goggles Integra, or DJI Goggles 2 — whichever goggles came with your Avata 2 kit. The goggles cavity is sized to accommodate any of the three, so operators upgrading between goggle generations can keep the same case.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes it fit both controllers?\u003c\/summary\u003e\n  \u003cp\u003eYes. The case has dedicated cavities for both the DJI RC 2 (the standard stick-and-screen controller for camera-stable flight) and the DJI Motion Controller 3 (or older Motion Controller 2) for FPV \/ motion-input flight. Pack both for training environments or single-pilot kits that switch between modes.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I check this on an airline?\u003c\/summary\u003e\n  \u003cp\u003eThe case shell is rated for the impact and environmental stresses of airline checked baggage. The DJI Avata 2 flight battery is approximately 31.7 Wh — well under the FAA \/ IATA 100 Wh threshold for spare lithium batteries in carry-on, which means spare batteries can travel with you in the cabin. Spare lithium batteries are not permitted in checked baggage; remove all batteries from the case if you check it, and carry them on. Verify rules with your specific airline before traveling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow is this different from the stock DJI cases?\u003c\/summary\u003e\n  \u003cp\u003eDJI's Fly More Combo ships with a soft zippered shoulder bag and a small Goggles case. The stock setup is lightweight and convenient for casual transport but offers minimal protection against impact, no watertight sealing, and limited organization for the full kit. The GPC case is significantly heavier and bulkier, but it survives drops, environmental exposure, and rough transport that would damage gear stored in the stock cases — and it carries everything in one organized unit.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill the foam wear out?\u003c\/summary\u003e\n  \u003cp\u003eThe closed-cell foam is designed for repeated drone-in \/ drone-out cycles and holds its shape over years of use. If you damage the foam or your aircraft configuration changes, GPC offers replacement foam inserts as separate SKUs. The case shell itself is covered by a lifetime replacement guarantee for manufacturing defects.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs the case lockable?\u003c\/summary\u003e\n  \u003cp\u003eYes. The padlock holes are reinforced with stainless steel padlock protector clips. The case accepts standard padlocks (sold separately). For programs that need TSA-compliant locks or specific security ratings, verify the padlock specifications against your organization's policy.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhere is it made?\u003c\/summary\u003e\n  \u003cp\u003eDesigned and built in Poway, California by Go Professional Cases — the same manufacturer that supplies hard cases for DJI's enterprise drone lineup used by public-safety, surveying, federal, and commercial operators. The shells are SKB military-spec, and the foam is water-jet cut in-house in the United States.\u003c\/p\u003e\n\u003c\/details\u003e\n","brand":"GPC","offers":[{"title":"Default Title","offer_id":48377622823229,"sku":"","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/GPCDJIAVATA2Case.jpg?v=1712928473"},{"product_id":"3d-printed-sig-sauer-p365-xmacro-comp-organizer-and-ammo-display-tray-for-apache-2800-case","title":"3D Printed Sig Sauer P365-XMacro Comp Organizer and Ammo Display Tray For Apache 2800 Case","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cp\u003eUpgrade your range setup with this precision-fit \u003cstrong\u003e3D Printed Organizer and Ammo Display Tray designed specifically for the Sig Sauer P365-XMacro Comp\u003c\/strong\u003e, made to fit perfectly inside the \u003cstrong\u003eApache 2800 protective case from Harbor Freight\u003c\/strong\u003e. This custom insert keeps your firearm, magazines, and ammunition neatly organized while providing a clean, professional display.\u003c\/p\u003e\n\u003cp\u003eWhether you're heading to the range or storing your gear safely at home, this tray maximizes the internal space of the Apache 2800 and keeps everything securely in place.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Fit Design\u003c\/strong\u003e – Custom-modeled to securely hold the Sig P365-XMacro Comp and accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApache 2800 Compatible\u003c\/strong\u003e – Designed specifically for the Apache 2800 protective case sold by Harbor Freight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Magazine Storage\u003c\/strong\u003e – Multiple magazine slots keep your mags protected and easy to access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmmo Display Section\u003c\/strong\u003e – Integrated ammunition tray for convenient storage and quick reloads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable 3D Printed Construction\u003c\/strong\u003e – Made from high-quality filament for strength and long-term durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Tone Professional Look\u003c\/strong\u003e – Clean red and black layered design for a premium display appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange-Ready Organization\u003c\/strong\u003e – Keeps your pistol, magazines, and ammo secure during transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerfect For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRange trips\u003c\/li\u003e\n\u003cli\u003eFirearm collectors\u003c\/li\u003e\n\u003cli\u003eOrganized firearm storage\u003c\/li\u003e\n\u003cli\u003eProfessional display setups\u003c\/li\u003e\n\u003cli\u003eProtective case upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × P365-XMacro Organizer \u0026amp; Ammo Display Tray\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Firearm, magazines, ammunition, and case are \u003cstrong\u003enot included\u003c\/strong\u003e. This listing is for the organizer insert only.\u003c\/p\u003e\n\u003cp\u003eGive your gear the organization and presentation it deserves with this purpose-built P365-XMacro display and storage solution.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Terrestrial Imaging","offers":[{"title":"Default Title","offer_id":51502624407869,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/sig-p365-x-macro-case-insert-in-case_17f5677e-7471-4842-a700-892eec5ede9a.webp?v=1773694641"},{"product_id":"3d-printed-sig-sauer-p322-organizer-and-ammo-display-tray-for-apache-2800-case","title":"3D Printed Sig Sauer P322 Organizer and Ammo Display Tray For Apache 2800 Case","description":"\u003csection class=\"product-description\"\u003e\n  \u003cp\u003e\n    Upgrade your case with a bold, precision-fit display insert. This custom\n    \u003cstrong\u003e3D printed case insert\u003c\/strong\u003e is designed specifically for the\n    \u003cstrong\u003eSig Sauer P322\u003c\/strong\u003e and fits perfectly inside the\n    \u003cstrong\u003eHarbor Freight Apache 2800 Case\u003c\/strong\u003e.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The insert securely holds the firearm and one magazine, while also featuring\n    dedicated storage for up to \u003cstrong\u003e32 rounds of .22 caliber ammunition\u003c\/strong\u003e.\n    Each component has its own defined space, keeping your setup organized and protected.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Designed for both function and presentation, the layout features a bold red frame\n    surrounding a textured center panel with precision cutouts for the P322 and magazine,\n    along with engraved labeling. A border of brass rounds creates a distinctive,\n    high-end display aesthetic that stands out when the case is opened.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Perfect for range days, storage, or showcasing your setup, this insert transforms\n    a standard case interior into a clean, professional presentation.\n  \u003c\/p\u003e\n\n  \u003ch2\u003eImportant\u003c\/h2\u003e\n  \u003cp\u003e\n    This listing is for the \u003cstrong\u003e3D printed insert only\u003c\/strong\u003e. The firearm,\n    ammunition, and Apache 2800 case shown in photos are \u003cstrong\u003enot included\u003c\/strong\u003e\n    and are used for demonstration purposes only.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Each insert is manufactured using durable materials and is precision-fit for\n    seamless integration with the Apache 2800 case.\n  \u003c\/p\u003e\n\u003c\/section\u003e","brand":"Terrestrial Imaging","offers":[{"title":"Default Title","offer_id":51504695542077,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/sig-sauer-p322-case-insert-main.webp?v=1773763504"},{"product_id":"3d-printed-sig-sauer-p365x-organizer-and-ammo-display-tray-for-apache-2800-case","title":"3D Printed Sig Sauer P365X Organizer and Ammo Display Tray For Apache 2800 Case","description":"\u003csection class=\"product-description\"\u003e\n  \u003cp\u003e\n    Upgrade your case with a bold, precision-fit display insert. This custom\n    \u003cstrong\u003e3D printed case insert\u003c\/strong\u003e is designed specifically for the\n    \u003cstrong\u003eSig Sauer P365X\u003c\/strong\u003e and fits perfectly inside the\n    \u003cstrong\u003eHarbor Freight Apache 2800 Case\u003c\/strong\u003e.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The insert securely holds the firearm \u003cstrong\u003ewith or without a Holosun HS507C red dot sight\u003c\/strong\u003e,\n    and includes dedicated storage for up to \u003cstrong\u003e32 rounds of ammunition\u003c\/strong\u003e.\n    Precision cutouts ensure a secure fit while keeping your setup organized and protected.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Designed for both function and presentation, the layout features a bold red frame\n    surrounding a textured center panel with precision cutouts for the P365X,\n    \u003cstrong\u003etwo magazines\u003c\/strong\u003e, and engraved labeling. A border of brass rounds\n    creates a distinctive, high-end display aesthetic that stands out when the case is opened.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Perfect for range days, storage, or showcasing your setup, this insert transforms\n    a standard case interior into a clean, professional presentation.\n  \u003c\/p\u003e\n\n  \u003ch2\u003eImportant\u003c\/h2\u003e\n  \u003cp\u003e\n    This listing is for the \u003cstrong\u003e3D printed insert only\u003c\/strong\u003e. The firearm,\n    ammunition, optic, and Apache 2800 case shown in photos are\n    \u003cstrong\u003enot included\u003c\/strong\u003e and are used for demonstration purposes only.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Each insert is manufactured using durable materials and is precision-fit for\n    seamless integration with the Apache 2800 case.\n  \u003c\/p\u003e\n\u003c\/section\u003e","brand":"Terrestrial Imaging","offers":[{"title":"Default Title","offer_id":51504701342013,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/sig-p365x-case-insert-back-in-case.webp?v=1773764367"},{"product_id":"3d-printed-smith-wesson-m-p9-m2-0-full-organizer-tray-for-apache-2800-case","title":"3D Printed Kimber Micro 9 Rapide Full Organizer Tray for Apache 2800 Case","description":"\u003cdiv class=\"product-description\"\u003e\n\n  \u003c!-- Hero Intro --\u003e\n  \u003cdiv class=\"pd-intro\"\u003e\n    \u003cp\u003eUpgrade your range setup with this precision-fit 3D printed organizer designed specifically for the \u003cstrong\u003eKimber Micro 9 Rapide\u003c\/strong\u003e. Custom-engineered to fit perfectly inside the \u003cstrong\u003eApache 2800\u003c\/strong\u003e protective case, this insert transforms your case into a clean, professional, and highly functional storage system — no modifications required.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Features --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003eFeatures\u003c\/h2\u003e\n    \u003cul class=\"pd-features\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrecision Fit Design\u003c\/strong\u003e — Custom-modeled for a snug, secure fit for the Kimber Micro 9 Rapide and magazine\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eApache 2800 Compatible\u003c\/strong\u003e — Drops right in with no cutting, trimming, or case modifications required\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDedicated Magazine Slots\u003c\/strong\u003e — Keeps your mags protected, separated, and easy to access\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Ammo Tray\u003c\/strong\u003e — Built-in ammunition section for organized storage and quick reloads\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurable 3D Printed Construction\u003c\/strong\u003e — Made from high-quality filament for long-lasting strength\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTwo-Tone Professional Look\u003c\/strong\u003e — Sleek red and black layered finish for a premium appearance\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRange-Ready Organization\u003c\/strong\u003e — Holds everything securely in place during transport\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Specs Table --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003eSpecifications\u003c\/h2\u003e\n    \u003ctable class=\"pd-specs\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eCompatible Firearm\u003c\/td\u003e\n\u003ctd\u003eKimber Micro 9 Rapide\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eCompatible Case\u003c\/td\u003e\n\u003ctd\u003eApache 2800\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-Quality 3D Print Filament\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eRed \u0026amp; Black\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eModifications Required\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eOrganizer Insert Only\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Perfect For --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003ePerfect For\u003c\/h2\u003e\n    \u003cul class=\"pd-tags\"\u003e\n      \u003cli\u003eRange Trips\u003c\/li\u003e\n      \u003cli\u003eFirearm Collectors\u003c\/li\u003e\n      \u003cli\u003eSafe Storage\u003c\/li\u003e\n      \u003cli\u003eProfessional Display Setups\u003c\/li\u003e\n      \u003cli\u003eProtective Case Upgrades\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's Included --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003eWhat's Included\u003c\/h2\u003e\n    \u003cp\u003e1 × Kimber Micro 9 Rapide Organizer \u0026amp; Ammo Display Tray\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Disclaimer --\u003e\n  \u003cdiv class=\"pd-disclaimer\"\u003e\n    \u003cp\u003e\u003cem\u003ePlease note: Firearm, magazines, ammunition, and Apache 2800 case are \u003cstrong\u003enot included\u003c\/strong\u003e. This listing is for the organizer insert only.\u003c\/em\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Terrestrial Imaging","offers":[{"title":"Default Title","offer_id":51505071685949,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/background-removed.webp?v=1774977680"},{"product_id":"3d-printed-smith-wesson-m-p-9-2-0-organizer-and-ammo-display-tray-for-apache-2800-case","title":"3D Printed Smith \u0026 Wesson M\u0026P 9 2.0 Organizer and Ammo Display Tray For Apache 2800 Case","description":"\u003cdiv class=\"product-description\"\u003e\n\n  \u003c!-- Hero Intro --\u003e\n  \u003cdiv class=\"pd-intro\"\u003e\n    \u003cp\u003eUpgrade your range setup with this precision-fit 3D printed organizer designed specifically for the \u003cstrong\u003eSmith \u0026amp; Wesson M\u0026amp;P 9 2.0\u003c\/strong\u003e. Custom-engineered to fit perfectly inside the \u003cstrong\u003eApache 2800\u003c\/strong\u003e protective case, this insert transforms your case into a clean, professional, and highly functional storage system — no modifications required.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Features --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003eFeatures\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrecision Fit Design\u003c\/strong\u003e — Custom-modeled for a snug, secure fit for the M\u0026amp;P 9 2.0 and magazine\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eApache 2800 Compatible\u003c\/strong\u003e — Drops right in with no cutting, trimming, or case modifications required\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDedicated Magazine Slots\u003c\/strong\u003e — Keeps your mags protected, separated, and easy to access\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Ammo Tray\u003c\/strong\u003e — Built-in ammunition section for organized storage and quick reloads\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurable 3D Printed Construction\u003c\/strong\u003e — Made from high-quality filament for long-lasting strength\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTwo-Tone Professional Look\u003c\/strong\u003e — Sleek red and black layered finish for a premium appearance\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRange-Ready Organization\u003c\/strong\u003e — Holds everything securely in place during transport\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Specs Table --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003eSpecifications\u003c\/h2\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Firearm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSmith \u0026amp; Wesson M\u0026amp;P 9 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Case\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApache 2800\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-Quality 3D Print Filament\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRed \u0026amp; Black\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModifications Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOrganizer Insert Only\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Perfect For --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003ePerfect For\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003eRange Trips\u003c\/li\u003e\n      \u003cli\u003eFirearm Collectors\u003c\/li\u003e\n      \u003cli\u003eSafe Storage\u003c\/li\u003e\n      \u003cli\u003eProfessional Display Setups\u003c\/li\u003e\n      \u003cli\u003eProtective Case Upgrades\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's Included --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003eWhat's Included\u003c\/h2\u003e\n    \u003cp\u003e1 × Smith \u0026amp; Wesson M\u0026amp;P 9 2.0 Organizer \u0026amp; Ammo Display Tray\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Disclaimer --\u003e\n  \u003cdiv class=\"pd-disclaimer\"\u003e\n    \u003cp\u003e\u003cem\u003ePlease note: Firearm, magazines, ammunition, and Apache 2800 case are \u003cstrong\u003enot included\u003c\/strong\u003e. This listing is for the organizer insert only.\u003c\/em\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Terrestrial Imaging","offers":[{"title":"Default Title","offer_id":51544041521469,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/smith-wesson-mp-2-insert-with-perimeter-case-open-with-gun_4a0f632b-aefe-4e55-8f3a-4f9e7fa99177.webp?v=1774979932"},{"product_id":"3d-printed-kimber-1911-rapide-organizer-and-ammo-display-tray-for-apache-2800-case","title":"3D Printed Kimber 1911 Rapide Organizer and Ammo Display Tray For Apache 2800 Case","description":"\u003cdiv class=\"product-description\"\u003e\n\n  \u003c!-- Hero Intro --\u003e\n  \u003cdiv class=\"pd-intro\"\u003e\n    \u003cp\u003eUpgrade your range setup with this precision-fit 3D printed organizer designed specifically for the \u003cstrong\u003eKimber 1911 Rapide\u003c\/strong\u003e. Custom-engineered to fit perfectly inside the \u003cstrong\u003eApache 2800\u003c\/strong\u003e protective case, this insert transforms your case into a clean, professional, and highly functional storage system — no modifications required.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Features --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003eFeatures\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrecision Fit Design\u003c\/strong\u003e — Custom-modeled for a snug, secure fit for the Kimber 1911 Rapide and magazine\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eApache 2800 Compatible\u003c\/strong\u003e — Drops right in with no cutting, trimming, or case modifications required\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDedicated Magazine Slots\u003c\/strong\u003e — Keeps your mags protected, separated, and easy to access\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIntegrated Ammo Tray\u003c\/strong\u003e — Built-in ammunition section for organized storage and quick reloads\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurable 3D Printed Construction\u003c\/strong\u003e — Made from high-quality filament for long-lasting strength\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTwo-Tone Professional Look\u003c\/strong\u003e — Sleek red and black layered finish for a premium appearance\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRange-Ready Organization\u003c\/strong\u003e — Holds everything securely in place during transport\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Specs Table --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003eSpecifications\u003c\/h2\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Firearm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKimber 1911 Rapide\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Case\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApache 2800\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-Quality 3D Print Filament\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRed \u0026amp; Black\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModifications Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOrganizer Insert Only\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Perfect For --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003ePerfect For\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003eRange Trips\u003c\/li\u003e\n      \u003cli\u003eFirearm Collectors\u003c\/li\u003e\n      \u003cli\u003eSafe Storage\u003c\/li\u003e\n      \u003cli\u003eProfessional Display Setups\u003c\/li\u003e\n      \u003cli\u003eProtective Case Upgrades\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's Included --\u003e\n  \u003cdiv class=\"pd-section\"\u003e\n    \u003ch2\u003eWhat's Included\u003c\/h2\u003e\n    \u003cp\u003e1 × Kimber 1911 Rapide Organizer \u0026amp; Ammo Display Tray\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Disclaimer --\u003e\n  \u003cdiv class=\"pd-disclaimer\"\u003e\n    \u003cp\u003e\u003cem\u003ePlease note: Firearm, magazines, ammunition, and Apache 2800 case are \u003cstrong\u003enot included\u003c\/strong\u003e. This listing is for the organizer insert only.\u003c\/em\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Terrestrial Imaging","offers":[{"title":"Default Title","offer_id":51544182686013,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/1631\/8269\/files\/case-insert-for-kimber-1911-rapide.webp?v=1774984705"}],"url":"https:\/\/www.terrestrialimaging.com\/collections\/cases.oembed","provider":"Terrestrial Imaging","version":"1.0","type":"link"}